AKS Hunter 0 Posted March 7, 2011 Report Share Posted March 7, 2011 Hi Guys I manufacture larsen traps made from 2"x1" timbers professionally jointed pilot holed and screwed with exceptional finish. Each trap comes with 1"x1" 16 gauge galv weld mesh and is very strong stuff... i use these traps myself and have sold alot to pest control friends gamekeeping friends and farmers in my local area. Each trap has a half covered call bird compartment with a perch, and 2 catching conpartments. The traps can be made on legs if you are struggling catching crows or just wish them to be off the floor, this also helps in preventing the timbers rotting. These traps are sound and very robust all timbers are treated and as long as they are looked after they will last years. I also make timber ladder traps too. also used by myself with great success aswell as alot of local people with the same results... these traps are 2m squared consisting of 4 sections for the perimeter and then one section for the roof which incorporates the ladder... minimal amount of sections for ease of movement. this trap is covered in the extra strong 12 gauge 3"x1" weld mesh. Aswell as the above i make rabbit drop boxes rabbit traps, and i supply fenn traps mole traps mink traps and other various cage traps For any enquiries please call Ben on 07816456267 Link to post Share on other sites
moxy 617 Posted March 7, 2011 Report Share Posted March 7, 2011 Pictures and prices may be an advantage, are your traps and cages genuine or imported chinese crap? A contribution towards the forum would also be a start. Link to post Share on other sites
kernow oli 28 Posted March 9, 2011 Report Share Posted March 9, 2011 Hi Guys I manufacture larsen traps made from 2"x1" timbers professionally jointed pilot holed and screwed with exceptional finish. Each trap comes with 1"x1" 16 gauge galv weld mesh and is very strong stuff... i use these traps myself and have sold alot to pest control friends gamekeeping friends and farmers in my local area. Each trap has a half covered call bird compartment with a perch, and 2 catching conpartments. The traps can be made on legs if you are struggling catching crows or just wish them to be off the floor, this also helps in preventing the timbers rotting. These traps are sound and very robust all timbers are treated and as long as they are looked after they will last years. I also make timber ladder traps too. also used by myself with great success aswell as alot of local people with the same results... these traps are 2m squared consisting of 4 sections for the perimeter and then one section for the roof which incorporates the ladder... minimal amount of sections for ease of movement. this trap is covered in the extra strong 12 gauge 3"x1" weld mesh. Aswell as the above i make rabbit drop boxes rabbit traps, and i supply fenn traps mole traps mink traps and other various cage traps For any enquiries please call Ben on 07816456267 can you put up some pics please of the ladder traps as i am very interested in getting one as alot of corvids round here cheers oli Link to post Share on other sites
Recommended Posts