8shot 192 Posted March 5, 2011 Report Share Posted March 5, 2011 pumping my gun up today i noticed it gettin easy at the end of each stroke and a slight hiss of air comming from it if i pump it up slowley its fine has anyone stripped one of these down and replaced seals is it easy thanks in advance Quote Link to post
RaiderBoy 19 Posted March 5, 2011 Report Share Posted March 5, 2011 pumping my gun up today i noticed it gettin easy at the end of each stroke and a slight hiss of air comming from it if i pump it up slowley its fine has anyone stripped one of these down and replaced seals is it easy thanks in advance Ive done mine once or twice since ive had it and its not that hard mate, as long as your a slighty competent person you should be fine Richard Quote Link to post
8shot 192 Posted March 5, 2011 Author Report Share Posted March 5, 2011 pumping my gun up today i noticed it gettin easy at the end of each stroke and a slight hiss of air comming from it if i pump it up slowley its fine has anyone stripped one of these down and replaced seals is it easy thanks in advance Ive done mine once or twice since ive had it and its not that hard mate, as long as your a slighty competent person you should be fine Richard thanks rich..... did you buy the seals from a company Quote Link to post
rossi_j 99 Posted March 5, 2011 Report Share Posted March 5, 2011 Hey 8shot, mine hisses on ocasions half way down during the stroke, I need to replace my seals aswel but putting it of as I dont know how harder job it is. I shall be keeping my eye on this thread .atb. .ste. Quote Link to post
8shot 192 Posted March 5, 2011 Author Report Share Posted March 5, 2011 Hey 8shot, mine hisses on ocasions half way down during the stroke, I need to replace my seals aswel but putting it of as I dont know how harder job it is. I shall be keeping my eye on this thread .atb. .ste. im going to strip it down tommorow so ill take some pics of me wrecking my pump im hoping that i have a spare seal that fits in the garage Quote Link to post
RaiderBoy 19 Posted March 5, 2011 Report Share Posted March 5, 2011 pumping my gun up today i noticed it gettin easy at the end of each stroke and a slight hiss of air comming from it if i pump it up slowley its fine has anyone stripped one of these down and replaced seals is it easy thanks in advance Ive done mine once or twice since ive had it and its not that hard mate, as long as your a slighty competent person you should be fine Richard thanks rich..... did you buy the seals from a company I just bought one of These from ebay and it had all the seals i needed. Richard 2 Quote Link to post
8shot 192 Posted March 5, 2011 Author Report Share Posted March 5, 2011 pumping my gun up today i noticed it gettin easy at the end of each stroke and a slight hiss of air comming from it if i pump it up slowley its fine has anyone stripped one of these down and replaced seals is it easy thanks in advance Ive done mine once or twice since ive had it and its not that hard mate, as long as your a slighty competent person you should be fine Richard thanks rich..... did you buy the seals from a company I just bought one of These from ebay and it had all the seals i needed. Richard thanks for that buddy..... im sure ill have one in the garage somewhere Quote Link to post
davyt63 1,845 Posted March 5, 2011 Report Share Posted March 5, 2011 Hey 8shot, mine hisses on ocasions half way down during the stroke, I need to replace my seals aswel but putting it of as I dont know how harder job it is. I shall be keeping my eye on this thread .atb. .ste. Quote Link to post
rossi_j 99 Posted March 5, 2011 Report Share Posted March 5, 2011 Hey 8shot, mine hisses on ocasions half way down during the stroke, I need to replace my seals aswel but putting it of as I dont know how harder job it is.I shall be keeping my eye on this thread .atb. .ste. I know, I know, what can I say, its a snake! 8shot, will look forward to the pics buddy, all to happy to let you crash test yours first Will get myself one of them seal kits and see if I can add stripping and reassembling a pump to the very short list of things I can do Let us kno how it goes .atb. .ste. Quote Link to post
hunter1989 91 Posted March 6, 2011 Report Share Posted March 6, 2011 ive just strip mine and done the seals its easy and pretty straight forward get yourself some 55 o ring silcone for the seals and put a tad on the pump its self atb steve Quote Link to post
bobajob 56 Posted March 6, 2011 Report Share Posted March 6, 2011 how did it outcome lad . the seal on mines is completely away i need to use my mates Quote Link to post
rossi_j 99 Posted March 6, 2011 Report Share Posted March 6, 2011 how did it outcome lad . the seal on mines is completely away i need to use my mates Perhaps 8shot is slumped over his work bench, head in hands, bits everywhere :laugh: Or perhaps hes sorted it ?! Or if hes like me hes been doing odd jobs for the mrs and not got round to it The mind boggles. . . . .atb. .ste. Quote Link to post
Webby1 34 Posted March 6, 2011 Report Share Posted March 6, 2011 buy a bottle you know it makes sense Quote Link to post
RaiderBoy 19 Posted March 8, 2011 Report Share Posted March 8, 2011 Im getting worried now how did it go mate, did you sort it?. Richard Quote Link to post
8shot 192 Posted March 8, 2011 Author Report Share Posted March 8, 2011 lol mate dont get worried ive just been to busy at the moment but as soon as i get time ill sort it out Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.