Elma Fudd4 0 Posted February 17, 2011 Report Share Posted February 17, 2011 Hi there. I have a 3-9x40 webley scope. From 3 to 6 x mag the picture is fine but once i go over 6 the picture becomes blurry. I have adjusted the reticule and nothing seems to work. Any tips much appreciated. Quote Link to post
SNAP SHOT 194 Posted February 17, 2011 Report Share Posted February 17, 2011 have you adjusted the paralex error if you never had a socpe with such adjusment..... Snap. Quote Link to post
Marksman 934 Posted February 19, 2011 Report Share Posted February 19, 2011 as snapshot said, you will need to adjust the objective lens to your desired range You can do this by selecting your desired zero range then to set parallax focus, undo the locking ring on the objective lens turn the objective parallax ring( the threaded bit) until the picture becomes crystal clear at your given shooting distance. Replace/retighten the locking ring and you are done. Hope this helps Darryl Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.