Guest AngelicAcid Posted January 25, 2011 Report Share Posted January 25, 2011 Whats a good thing to use as pegs for bigger nets? Quote Link to post
bannyboy 3 Posted January 25, 2011 Report Share Posted January 25, 2011 plastic tent pegs Quote Link to post
Guest AngelicAcid Posted January 25, 2011 Report Share Posted January 25, 2011 Would you say better than the metal ones> Just wondered do they slide out of the ground easy? Quote Link to post
fat man 4,741 Posted January 26, 2011 Report Share Posted January 26, 2011 Whats a good thing to use as pegs for bigger nets? Only yesterday while out with a hound pack the lad that does the terrier work had nets ,and he was using the old stove or fire poker with the ring top cut down to about 10inch it looked the buisness Quote Link to post
Reddog83 4 Posted January 26, 2011 Report Share Posted January 26, 2011 Plastics no good for big stuff u need metal. tent pegs are not to good they bend in tough ground the poker sounds a good 1 they need to be 9"inch long"like my flute" or they come out in loose stuff Quote Link to post
earthmover2011 94 Posted January 26, 2011 Report Share Posted January 26, 2011 I made mine out wooden branches drill hole in the end but not to close to end so don't split through or old broom shank cut into loads peac sharpen ends depends on ground as well 1 Quote Link to post
FightTheBan 1,147 Posted January 26, 2011 Report Share Posted January 26, 2011 Metal pegs are best. Wood snaps in frost and plastic bends. Get a fabricator to make you some up cost next to nowt. Need to be at least 6 inch long, drill a hole about 3/4 of the way up and get them to point the ends with a lathe or grinder. FTB Quote Link to post
Guest AngelicAcid Posted January 26, 2011 Report Share Posted January 26, 2011 Cheers lads, ftb that sounds like the type of thing that would work very well and also last. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.