Jump to content

Recommended Posts


bv

What is the cheapest way of getting into a vehicle that has your keys in the ignition :icon_redface:

 

Friend of mine has got his keys stuck in a transit connect van.

 

Smashing the window is last option for obvious reasons.

 

FTB

 

tell him to ring his insurance before doing anything, he might just be covered?

Link to post
Share on other sites

Has it got central locking? Sometimes half a tennis ball over the lock and punch it. The change in pressure lifts the lock. Or sometimes you can lift the sill at the bottom of the window and slide a coat hanger down to hook around the lock mechanism and lift. Used to work on older motors but not sure on the new ones!

Link to post
Share on other sites

52 plate, pretty sure it will have central locking.

 

Local dealer said he has to trace back to where the van originally came from before he can get a replacement key :hmm:

 

I just told him if he is going to crack a window, make it the passanger side to limit the draft :laugh:

 

FTB

Link to post
Share on other sites

;)

Hopefully someone can help.

 

Where are these pikeys when you need them eh?

 

:whistling:

 

FTB

pikeys again is it ftb :wankerzo4: ...............................

 

smash window pal central locking he dont wont to be messing with he door lock ;)

Link to post
Share on other sites

;)

Hopefully someone can help.

 

Where are these pikeys when you need them eh?

 

:whistling:

 

FTB

pikeys again is it ftb :wankerzo4: ...............................

 

smash window pal central locking he dont wont to be messing with he door lock ;)

 

 

(Joke)

:thumbs:

 

FTB

Link to post
Share on other sites

Has it got central locking? Sometimes half a tennis ball over the lock and punch it. The change in pressure lifts the lock. Or sometimes you can lift the sill at the bottom of the window and slide a coat hanger down to hook around the lock mechanism and lift. Used to work on older motors but not sure on the new ones!

 

 

I thought the tennis ball method only worked with Mercedes? Something to do with them having compressed air locking? Maybe wrong as I'm clearly no expert :thumbs:

Link to post
Share on other sites
Guest thebigdog

if it has electric mirrors take one off and earth the wires in it, will open locks, dead lock and the immobliser. it works on the big transits of same age so will more than likely work on the connect. :thumbs:

Link to post
Share on other sites

Has it got central locking? Sometimes half a tennis ball over the lock and punch it. The change in pressure lifts the lock. Or sometimes you can lift the sill at the bottom of the window and slide a coat hanger down to hook around the lock mechanism and lift. Used to work on older motors but not sure on the new ones!

 

You could be right mate, it's just one method I've heard of. Worth the price of a tennis ball to find out though!!

 

I thought the tennis ball method only worked with Mercedes? Something to do with them having compressed air locking? Maybe wrong as I'm clearly no expert :thumbs:

Link to post
Share on other sites

if it has electric mirrors take one off and earth the wires in it, will open locks, dead lock and the immobliser. it works on the big transits of same age so will more than likely work on the connect. :thumbs:

 

 

Don't think it has electric mirrors, knowing my pal it will be poverty spec.

 

But a pretty cool trick if it works :thumbs:

 

FTB

Link to post
Share on other sites

put knee were the door handle is

fingers at the top of the door

and pull firmly tell him not to yank it

the top of the door will start to lean out

if he's skiny tell him to put his arm in

and open the door or use a wire coat hanger

he wont smash the window as long as he does'nt yank it

when its open put his knee on the door panel

and pull the top of the door back in

good as new

tennis ball only works on merc's

Link to post
Share on other sites

Has it got central locking? Sometimes half a tennis ball over the lock and punch it. The change in pressure lifts the lock. Or sometimes you can lift the sill at the bottom of the window and slide a coat hanger down to hook around the lock mechanism and lift. Used to work on older motors but not sure on the new ones!

 

This is the best way mate pull door at the top just enough use a metal coat straighten out with a hook at the end and bend and go for either the keys or the door latch works a treat (done it a couple of times same kind of van this is how we sorted it) :thumbs:

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...