jen.d 0 Posted December 17, 2010 Report Share Posted December 17, 2010 ive got a 2.8 P reg shogun which was running fine until about a month or so ago when i filled up at a total garage which then i went on a run and coming round a roundabout went to accelerate away and there was no power in 4th so had to drop back to 3rd to gain some revvs which it was reluctant to do but did and slowly crept up to 60 but wouldnt go no faster then pulled up at another garage turned it off and back on it was fine but recently it has become worst it now cuts out wont pick up above 50mph then the speed declines and the revvs just keep dropping really low then it just cuts out but somebody has said it could it be water in the tank or the fuel pump going as it has got an electric fuel pump on due to somebody doing a bodge job on it before i bought it but it was running fine until this fuel from a certain garage any advise please Quote Link to post Share on other sites
lamperman 12 Posted December 17, 2010 Report Share Posted December 17, 2010 drop the drain plug out of the bottom of the tank mate drain it into a clean bucket see what comes out probably fuel and water then change your fuel filtter fill it up with clean fuel then bleed it through and you should be ok hope this helps Quote Link to post Share on other sites
jen.d 0 Posted December 17, 2010 Author Report Share Posted December 17, 2010 drop the drain plug out of the bottom of the tank mate drain it into a clean bucket see what comes out probably fuel and water then change your fuel filtter fill it up with clean fuel then bleed it through and you should be ok hope this helps ok thanks for that gonna nip it to garage in the morning and ask them to check it for me. i didnt wanna go there sounding like i didnt no what it was and end up with it could be this or could be that sort of bill Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.