hullhunter 219 Posted November 24, 2010 Report Share Posted November 24, 2010 (edited) hi all was out shooting today and 1/3 of a washer has fell out of my tx200. it was about the size of a 10p. any ideas what it could be the gun shoots the same in fact there is no difference what so ever. also haw much do you think it would cost me to get it fixed. thanks for your help. Edited November 24, 2010 by hullhunter Quote Link to post
pianoman 3,587 Posted November 24, 2010 Report Share Posted November 24, 2010 Hi hullhunter. Cock the rifle open and have a look inside around the protruding pellet breech. It may be the lining around that, that's broken. I cannot think of anything else in a TX200 that's as large as a 10p piece and could fall out of anywhere but the loading port. Hope it's ok. Simon Quote Link to post
hullhunter 219 Posted November 25, 2010 Author Report Share Posted November 25, 2010 (edited) Hi hullhunter. Cock the rifle open and have a look inside around the protruding pellet breech. It may be the lining around that, that's broken. I cannot think of anything else in a TX200 that's as large as a 10p piece and could fall out of anywhere but the loading port. Hope it's ok. Simon thanks. ive had a look and cant see anything. the pice that fell out was not the size of a 10p it was 1/3 the size. (sorry i didnt explain it very well)ive looked every were i can see into the gun and i cant see were it could have come from. Edited November 25, 2010 by hullhunter Quote Link to post
pianoman 3,587 Posted November 25, 2010 Report Share Posted November 25, 2010 Hmmm . If you can cock, load, aim and fire the rifle without any problems, I'm at a loss as to what else to suggest. Hope it's okay mate Simon Quote Link to post
hullhunter 219 Posted November 25, 2010 Author Report Share Posted November 25, 2010 Hmmm . If you can cock, load, aim and fire the rifle without any problems, I'm at a loss as to what else to suggest. Hope it's okay mate Simon thanks anyways mate. Quote Link to post
johnboy19 38 Posted November 25, 2010 Report Share Posted November 25, 2010 dunno if the diagram on this may help, if you have the mark3 you will have to go back to the air arms page and pick the mark3 http://gunspares.co.uk/shopdisplayproducts.asp?id=24242&cat=TX200+MK+I+%26amp%3B+II Quote Link to post
hullhunter 219 Posted November 25, 2010 Author Report Share Posted November 25, 2010 dunno if the diagram on this may help, if you have the mark3 you will have to go back to the air arms page and pick the mark3 http://gunspares.co.uk/shopdisplayproducts.asp?id=24242&cat=TX200+MK+I+%26amp%3B+II spot on mate. ill strip it down and have a proper look. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.