shandy1499 0 Posted October 3, 2010 Report Share Posted October 3, 2010 hi all replaced the head gasket today on my L reg vitara also decided to do the cambelt lined up the the e mark with the timing cover at tdc and popped it all back together anyway it wont start at all. afterwards we noticed the cam shaft pulley has got an E at the top of the pulley and an I and then i noticed it has got an E which is upside down and both the E marks have both got notches which is the correct one to use and how do i set about setting the timing at the cam and the distribitor please help Quote Link to post Share on other sites
Fat-Ferret 857 Posted October 3, 2010 Report Share Posted October 3, 2010 You shouldnt F with timinmg belts if you dont know what your doing... Quote Link to post Share on other sites
shandy1499 0 Posted October 3, 2010 Author Report Share Posted October 3, 2010 thanks for the constructive comment very usefull Quote Link to post Share on other sites
rikjd 8 Posted October 5, 2010 Report Share Posted October 5, 2010 ask a local garage if they have a timebelt book you can borrow, most have a big book with every model in, next time use tipex to make your own marks that way you know its back as it was when you started, and just hope you havent damaged anything.... Quote Link to post Share on other sites
TOMO 27,084 Posted October 6, 2010 Report Share Posted October 6, 2010 have a look on the internet, it is the imformation superhighway after all, last month i even found stuff actualy fimed on youtube . so have a look there mine was in a forign language but you just follow what he did on the film Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.