Finally Built my ferret Court

[longdog13 36]

  On 14/09/2010 at 13:42, seany said:

Nice one mate I like the way you've built around the tree

ATB Seany

 

Thanks fella, there is a cropped down rose bush too, all ads to the natural feel, the wee ferrets are loving it :D

[longdog13 36]

Thakns GUys and Gals, probably the most productive days work i've done in a very long time

[longdog13 36]

  On 14/09/2010 at 07:57, tonyh said:

  On 13/09/2010 at 21:49, longdog13 said:

I missed one

thats a great job,well done.nice ferrets as well

 

Thanks Tony

[theferreter 311]

good job fella

[Guest fence_hopper]

tidy mate where did you get the mesh and how much

[longdog13 36]

  On 14/09/2010 at 19:30, fence_hopper said:

tidy mate where did you get the mesh and how much

 

Good old Ebay matey, i got it for 50 pounds posted. its inch x half inch weld mesh, 30 mtr roll, it was a private seller, but i'm sure you can get the inch x inch stuff quite cheaply

[Guest fence_hopper]

cheers mate handy stuff

Edited September 15, 2010 by fence_hopper

[the hunter 0]

nice set up there mate lucky ferrets atb

[jonnytraff 8]

nice set up mate.. if you don't mind me asking how much are we looking for a roll of mesh these days.. ie the type you bought??? atb jon

[longdog13 36]

  On 14/09/2010 at 23:30, jonnytraff said:

nice set up mate.. if you don't mind me asking how much are we looking for a roll of mesh these days.. ie the type you bought??? atb jon

 

Anywhere between 50- ponds delivered off of ebay, just make sure you take note of the length of the roll, the one i got was 30mtrs, the wod i got from travis perkins, the whole thing cost about £100 pounds including screws staple gun and staples etc. Alot cheaper and bigger than the chicken coups on ebay etc

[billy bronk 76]

plenty room for them pal

[seany 54]

  On 15/09/2010 at 17:38, longdog13 said:

  On 14/09/2010 at 23:30, jonnytraff said:

nice set up mate.. if you don't mind me asking how much are we looking for a roll of mesh these days.. ie the type you bought??? atb jon

 

Anywhere between 50- ponds delivered off of ebay, just make sure you take note of the length of the roll, the one i got was 30mtrs, the wod i got from travis perkins, the whole thing cost about £100 pounds including screws staple gun and staples etc. Alot cheaper and bigger than the chicken coups on ebay etc

Do you think chicken wire sturdy enough for ferrets?

ATB Seany

[Guest fence_hopper]

  On 16/09/2010 at 16:15, seany said:

  On 15/09/2010 at 17:38, longdog13 said:

  On 14/09/2010 at 23:30, jonnytraff said:

nice set up mate.. if you don't mind me asking how much are we looking for a roll of mesh these days.. ie the type you bought??? atb jon

 

Anywhere between 50- ponds delivered off of ebay, just make sure you take note of the length of the roll, the one i got was 30mtrs, the wod i got from travis perkins, the whole thing cost about £100 pounds including screws staple gun and staples etc. Alot cheaper and bigger than the chicken coups on ebay etc

Do you think chicken wire sturdy enough for ferrets?

ATB Seany

 

no mate its shite that stuff they'll chew through it.

Edited September 16, 2010 by fence_hopper

[longdog13 36]

no mate its shite that stuff they'll chew through it.

 

 

As said mate, needs to be weld mesh, chicken wire is great for chickens, crap for ferrets

[longdog13 36]

They loves it mate, they're looking leaner already, i'm feeding them on the top shelf to add the exercise factor :showoff: