S16 buddy bottle dust cap or original Logun bottle o ring seal wanted

[kingoftoosh 15]

Hi all .I am on the lookout ffor the above mentioned parts.A dust cap for logun S16 buddy bottle and if possible an original lougun bottle seal for a mk2 .The one where o ring is in gun not on bottle.Can anyone help if they have any of these spare and lying about and looking for a good home? or point me in the right direction!

cheers KOT

[Phantom 631]

Although not listed on the site, they will probably be able to help over the phone, they did when I rang them about something

 

http://www.gunspares.co.uk/shopdisplaycategories.asp?id=23960&cat=Airgun+spares

 

Phantom

[garfield 23]

there should be a seal around the bottom of the thread on the bottle and the rapid bottle seals fit aswell cant help with the bottle cap though sorry

[kingoftoosh 15]

there should be a seal around the bottom of the thread on the bottle and the rapid bottle seals fit aswell cant help with the bottle cap though sorry

 

Hi Garfield.NO seal on bottle ,dont think there is meant to be one on the mark 2 bottle,from what I can Gather that was a problem with the mark1 ,the o ring actually being on the bottle and getting knicked when screwing in. will try and double check that one though.

the gun i have is the one with shrouded barrel not the thin barrel with silencer.

I think I seen a pic of your gun the other night was reggaeman selling it on your behalf or something....think yours was the thin barrel version.

Cheers for the tip about the rapid bottle seal,will try to look in to that also.

atb kot

[Phantom 631]

S-16 Evo?

 

Phantom

[garfield 23]

yeah i had the mk1 if yours is the mk2 it might be seated inside the female thread but not had chance to have a look at one yet

[kingoftoosh 15]

S-16 Evo?

 

Phantom

 

No phantom ,just the s16!

[madmacca 15]

S-16 Evo?

 

Phantom

 

No phantom ,just the s16!

 

 

correction mate S16s

 

and asi said to u mate i have some seals here that shouldnt be a problem as iv had quite a few s16 and usually u can just replace them with normal ones i know exactly what one u r talking about as stated the rifle was mine to start with and never had that 1 seal replaced.

p.s. just thought it wasnt leaking out of the litte hole on side of female mount was it if it has a sticky valve again and needs cleaning again!

 

p.s. if u need me give me a bell or need me to take a look at it or strip n service it give me a bell mate

 

also mk1s the barrel seal is on the pellet probe & the bottle seal is on the male bottle adaptor

 

mk2 and evo barrel seal is in the barrel & the bottle seal is inside the female adaptor!

 

also the evo gives more shot counts and u can get a bigger amount of power out of it for FAC jue to the lager ports n valves! but there prone to problems as for the mk1 having numerous problems its more of a myth and miss-use than them breaking alot i had mine for ages and never ever had any problems with it and was deadly accurite

 

atb macca

Edited September 5, 2010 by madmacca

[kingoftoosh 15]

Awright macca I will give u a phone next week bud cos I'm in scotland the now.think it was coming from seal have original seal still maybe it just needed cleaned will try that also when I get back. Am ont the wifes bloody blackberry and my fat fingers are in the way. Rifle is accurat don't you worry. More so thjen me lo l. But its teaching me how to shoot better than [my old vulccan was.