lure machine togetha

[tattey 7]

HEARS MY LURE MACHINE GOT THE IDIA OTHE DAY THANXS FOR THE ADVIE AND COMENTS HEARS THE PICS TRYED IT WITH JUMP LEADS IT WORKS HAVE TO GET IT WIRED UP TOMOZ N GIVE THE DOG AGO WAT YOU LADS THINK HOW MUCH WOULD U PAY FOR WHAT YOU SEE IN THE PICS WITH OUT THE BATTERY AND LEADS BUT EVERY THING ELS?

 

 

http://s1046.photobucket.com/albums/b466/tattey2007/

[monkey 449]

good job pal, its worth 10 pounds of any one's money

[tattey 7]

I ISNT IT JUST LIKE YOUR HEADS WORTH A TEN POUND HAMER OVER IT HAHA

[Mr Hunter 30]

Bit of advice Tattey.Fit a kill switch as sometimes solenoid stick and motor keeps turning and starter starts to smoke.I built my own also and its happened twice to me so bought a kill switch from local discount car shop.atb MH

[hogdog 61]

Nice one, looks well made. Fitting a kill switch is good advice also heep an eye on how hit it's getting or you'll melt the motor. I don't do runs longer than about 100m with mine because of the heat isssue...the motors not meant to be used for more than 10 seconds at a time.

[scothunter 12,609]

looks like a good set up and well made,lets know how you get on with it mate

[stubby 175]

unless you have got some weight on the lure, whats to stop the line jumping off the spool and tangling

[hogdog 61]

unless you have got some weight on the lure, whats to stop the line jumping off the spool and tangling

 

Most people pin the line to the ground using a U shaped piece of metal about a metre from the machine then another one a few metres away from the machine which the line is then run at an angle to so the Dog doesn't run directly towards the machine. By far the best lure is a plastic bag...trust me we've tried everything. Anything heavier will mean the machine runs too slow and will run the risk of burning the motor out.

[tattey 7]

CHEERS FOR THE ADVISE JUST TRYED IT WITH OUT READING AND IT GOT TANGLED IL USE THE U BEND PINS NEXT TIME ALSO GUN FIT A GIVED ROLER TO IT UDATE TOMOZ BUT FOR FIRST TIME IT WAS SPOT ON

[Mr Hunter 30]

I use one of them eyed screws fixed to my frame it stops line from bouncing about.I done some 350yard runs with mine and it does get hot but had no other problems with motor. Some days when running my lurcher club i was doing 40-50 runs and only prob was solenoid so always had a spare and a spare battery on hand.I use a scalextric control for my controller and i also ahve a spindle made from an old bike wheel so i never have dogs running towards me i always on an angle.Im only in Billingham mate so if your not too far in durham your more than welcome to pop over and take a peek and give dogs a run on mine

[tattey 7]

I use one of them eyed screws fixed to my frame it stops line from bouncing about.I done some 350yard runs with mine and it does get hot but had no other problems with motor. Some days when running my lurcher club i was doing 40-50 runs and only prob was solenoid so always had a spare and a spare battery on hand.I use a scalextric control for my controller and i also ahve a spindle made from an old bike wheel so i never have dogs running towards me i always on an angle.Im only in Billingham mate so if your not too far in durham your more than welcome to pop over and take a peek and give dogs a run on mine

 

 

might do pal il let u no

[graham4877 1,181]

what is the solenoid off/ where can i get one??

[Mr Hunter 30]

Old mini i think they are graham they are about £6-£7.

[tattey 7]

yeah they are lucas solinoids