Lure

[davey 310]

Just made a lure for summer months and was wondering what people used to mark out a simulated run as the dog gets bored after a couple of straight runs

[Fabapocalypse 35]

Shopping trolley wheels make good pulleys.

[mike1458 14]

Small bike wheels or bmx wheels.

 

ATB Mike

[davey 310]

Was thinking welding rod pulled into a small circal and knocked into the ground about 2inches like a tent peg as lure pulls along it picks them up as not to leave anything he can tread on

[jackson2kaii8 5]

Was thinking welding rod pulled into a small circal and knocked into the ground about 2inches like a tent peg as lure pulls along it picks them up as not to leave anything he can tread on

how do ya make a lure..?

[thomsonj296 0]

hi jackson a starter motor from a car fit adrum onthe drive rod end if you know an auto electrician get him to fit a starter switch to it then rig it up to a battery or i use a jump starter pack its lighter and easier to handle

Edited July 20, 2010 by thomsonj296

[davey 310]

I used an old mini starting motor and the solenoid off it as the switch For the wheel I used a coil off mig welder with a piece of 2 inch pipe jammed in it Welded 2 up rights on a piece of 6 mm plate bolted start motet to it .Don't think you can use a new starting moter as it don't spin constant ?

[CarraghsGem 92]

I used an old mini starting motor and the solenoid off it as the switch For the wheel I used a coil off mig welder with a piece of 2 inch pipe jammed in it Welded 2 up rights on a piece of 6 mm plate bolted start motet to it .Don't think you can use a new starting moter as it don't spin constant ?

 

 

theres a lure machine for sale on here! not a bad price neither