How do i clean sak mod

[theinvisiblescarecrow 0]

If your's is the newer spin off front It's easy, just remove front cap & slide the outer tube away from the baffles.

Clean with method of choich.

If the older grub screw version, I've had single & triple screw ones, the method can be quite awkward If it's gummed up.

Undo the grub screw/s, place a small bit of wood or hard plastic on the floor.

Whack the muzzle end on the block, If the outer tube doesn't slide off spray with WD40 or slippery stuff of choice, let it soak in & maybe apply several times over a period of time.

A good whack with a firm grip on the outer tube should see it moveing.

If not more WD40 if really stuck, If It's really stiff & starts to move only a small amount turn it over & whack the tube back on then turn over whack & turn & whack & turn & you get the idea.

The older grubscrew versions are slightly tapered so the tube fits one way.

Once clean & slideing smoothly this can be easily checked, If it doesn't go back on turn it around.

I do spray with welders anti spatter spray, all that does is make it easier to remove the gunk, it still sticks but not so badly.

Oil will turns to carbon or goes gummy so a little bit of copper grease on the joints & threads is a better idea.

New to SAK ownership or thinking of getting one ?

Type SAK with either air rifle or rimfire or HMR into the search box.

Here's one on the HMR.