17 trigger kit?

[vindiesel 1]

Ive got a CZ .22 which is a beauty to use and a CZ 17 hmr which has a really hard pull on the trigger. I'm lookin for a decent trigger kit any suggestions lads? Other wise it'll have to go.

[blackfox 9]

Give rimfire magic a call www.rimfiremagic.co.uk

 

Hope this helps

 

Sam

[jamie g 17]

yes order it from rimfire magic. top service i ordered one for a mate not to long back. i phoned up at 3 in the afternoon on a friday. and 7 the next morning it was on my door step

[SNAP SHOT 194]

give roger or dave a call at syss, rimfiremagic.com, i cannot recommend their service highly enough,

 

And its cheap as chips...

 

Snap.

[Deker 3,477]

Brooks has an extra spring and tube, similar money...whatever, this is about the cheapest trigger job it is possible to get and the difference is well worth it!

[Colster 1]

There's also the Yo Dave kit which includes a tube for the sear pin, that was all my CZ Silhouette needed.

 

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=160452856255

 

 

18.50 Canadian dollars = 11.7182435 British pounds... roughly

[andyf 144]

Ive got a CZ .22 which is a beauty to use and a CZ 17 hmr which has a really hard pull on the trigger. I'm lookin for a decent trigger kit any suggestions lads? Other wise it'll have to go.

OK

The Eric Brooks kit is the same as what you get from the 'Rimfire Magic' boys, as the rest said a doddle to fit and a 100% improvement.

It's a selection of springs and some spacers to take up the sear 'creep' I fitted the lightest spring and the thickest spacer,

OH just so much better.

If you can be bothered Eric Brooks USA also do a replacement 'Allen key' screw set for all CZ (BRNO), to replace the slotted factory

screws, cheap as chips and a nice finishing touch.

AndyF