hunter1989 91 Posted July 6, 2010 Report Share Posted July 6, 2010 hi how do i get rid of rust from the outside of my barrel,i got oil whats the best way to wipe it clear regards steve Quote Link to post
Ron Weasley 83 Posted July 7, 2010 Report Share Posted July 7, 2010 When you say rust, how bad are we talking? If it's corroded, it might be a wire brush/wire wool and re-blue job. If it's just a little surface rust, it should just wipe off with a bit of gun oil on a rag. It's always a good idea to give your guns a wipe over with an oily rag when you've finished, sweat and perspiration in your hands can be quite corrosive and cause a little rusting. And of course, never put your gun away wet! If it gets wet in the field, dry it thoroughly and wipe it over with an oily rag before it goes away. Quote Link to post
markha 99 Posted July 7, 2010 Report Share Posted July 7, 2010 I religously wipe my whole gun down after use, with an old rag splashed with 3-in-1, oh and a drop of napier gun oil that I got as a free sample. 3-in-1 was originally developed as a gun oil, I wont pay extra for branded gun oils with an added 'nice smell' stuff that Quote Link to post
matt_hooks 188 Posted July 9, 2010 Report Share Posted July 9, 2010 Just a few drops of oil on a clean rag should get rid of light rusting. If it's a bit tough for that, I use a bit of scrunched up aluminium foil. It takes off rust but doesn't touch the metal underneath, something to do with the relative hardheaded of aluminium, gun steel and rust. Also works a dream for rusty chrome parts! 2 Quote Link to post
markha 99 Posted July 9, 2010 Report Share Posted July 9, 2010 Top tip with the aluminium, not heard that one before, 1 point given Quote Link to post
rossy08 33 Posted July 9, 2010 Report Share Posted July 9, 2010 Just a few drops of oil on a clean rag should get rid of light rusting. If it's a bit tough for that, I use a bit of scrunched up aluminium foil. It takes off rust but doesn't touch the metal underneath, something to do with the relative hardheaded of aluminium, gun steel and rust. Also works a dream for rusty chrome parts! This is why i love this forum, top little tips like this, sound advice sp awarded from me to. good on ya pal. atb Andy Quote Link to post
matt_hooks 188 Posted July 9, 2010 Report Share Posted July 9, 2010 Awww, gee, thanks guys! Just spotted a small typo, that's what you get for using an iPhone. Hardheaded should read hardness! Quote Link to post
air gun ant 1,666 Posted July 27, 2010 Report Share Posted July 27, 2010 Top tip nice 1 just the imfo I needed :-) Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.