attaching velcro to stock?

[olim 28]

I'm wanting to attach a piece of soft velcro to my tactical gun stock for a momentary switch but dont know any way of glueing it without damaging the stock, is this just something you have to put up with or are there any other ways to attach it without causing damage.

 

thanks oli

[Buster321c 1,010]

Its just double sided sticky , you can get it from alot of places , it`ll be fine on your stock .

[Phantom 631]

As Buster said, its not going to hurt or damage the stock

 

You could go the way of my friend and use elastic bands.

 

But I'd STICK to the normal way as it keeps it in place better. Double sided tape.

 

Phantom

Edited July 3, 2010 by Phantom

[george atkins ga 1]

double sided tape works fine

[THE GRIFF 8]

As above, my lamp came with some velcro you just peeled off the back the sticky tape was already on the back. I am sure you can get velcro with a sticky tape already on one side from any craft shop or sewing shop.

[Fisheruk 1]

As the Griff says you can buy sticky back velcro quite easily. Hobbycraft and Dunelm both sellit.