jazmin 44 Posted May 31, 2010 Report Share Posted May 31, 2010 Ok here goes i got my first pcp after many years of springers(its a 2 shot raider)after the struggle of getting a decent pellet to match the gun and tightening the top plate on the 2 shot mag i started getting some good bags.Went off yesterday to complete my set up and brought a sak mod from local gun shop.The guy says its for .17 and .22 bullet rifles but will work fine on a airgun?I have been out early this morning and after abit mucking around trying to adjust poi there was lead clipppings in the mod.The threads on the barrel have an rubber o ring near the thread end does this stay on or off when fitting the mod.Is there any thing else i can do or try as i am getting a little miffed with this rifle now.Cheers dean. PS i am using falcon pellets with good results when mod is not on gun. Quote Link to post
garfield 23 Posted May 31, 2010 Report Share Posted May 31, 2010 a new sound mod shouldnt have pellets clipping the end but i had the same prob with my raider but mine has the shrouded barrel so i can live without, i would get it back to the shop and ask him to check the tread alignment on both the mod and the barrel Quote Link to post
jazmin 44 Posted May 31, 2010 Author Report Share Posted May 31, 2010 a new sound mod shouldnt have pellets clipping the end but i had the same prob with my raider but mine has the shrouded barrel so i can live without, i would get it back to the shop and ask him to check the tread alignment on both the mod and the barrel Ok mate i will do like you say its one or the other Quote Link to post
falcongit 242 Posted May 31, 2010 Report Share Posted May 31, 2010 hi had the same probs with mine clipping,and its brand new the same as yours,it sounds like alot of people are having the same problems..if i was you get a different one, they are not that quite anyway.i use a weihrauch on my bsa ultra,hope this is some help. sym Quote Link to post
jazmin 44 Posted May 31, 2010 Author Report Share Posted May 31, 2010 hi had the same probs with mine clipping,and its brand new the same as yours,it sounds like alot of people are having the same problems..if i was you get a different one, they are not that quite anyway.i use a weihrauch on my bsa ultra,hope this is some help. sym Same here falcongit its a new mod.I can take it back no problem.Will be more peed off its the thread on the gun though cheers maybe try a diffrent mod first then Quote Link to post
stealthy1 3,964 Posted May 31, 2010 Report Share Posted May 31, 2010 If you can borrow a mates mod to try, then I would try that first, if the swap makes a difference than get another mod, if taking your pressent mod off returns your accuracy, then chances are its your mod, but the only way to find out if its the threads for your mod is to try another mod Quote Link to post
jazmin 44 Posted June 1, 2010 Author Report Share Posted June 1, 2010 If you can borrow a mates mod to try, then I would try that first, if the swap makes a difference than get another mod, if taking your pressent mod off returns your accuracy, then chances are its your mod, but the only way to find out if its the threads for your mod is to try another mod Took it back today got my £35 back.It was the mod.Problem is am still in need of a mod as these where the only ones he had in Any going cheap anyone Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.