BSA meteor

[davyt63 1,845]

hi every one

as you know my fast typing had landed me a nice little refurb job ,thanks to Cunningham.

now i have had a look at it once all the alcohol has left My tired body,and have came up with a list of parts that need replacing due to worn or broke.

 

here is the list below

 

1: 1 mainspring 16-1035

 

2: 1 mainspring setting washer 16-2198

 

3: 1 mainspring guide nylon 16-2197

 

4: 1 barrel sealing washer 16-1050

 

5: 1 bearing washer 16-1045

 

6: 1 buffer 16-2347

 

7: 1 piston head 16-2194

 

8: 1 sealing ring 16- 2195

 

9: 1 for end screw (2) 16-1030

 

10: 1 for end screw washer (2) 16-1010

 

if any one out there can advise me on where i could purchase such parts,i would be very grateful.as this is my first refurb and want to do it right!its not in bad nick to be fair it just needs some TLC

 

please feel free to copy and pate and do all the running around for me!

 

regards

 

davy

[mike white 1]

Hi davy , heres a link to chambers mate all you have to do is select what mk it is and you should be able to get the bits .

 

http://www.gunspares.co.uk/shopdisplaycategories.asp?id=24305&cat=Meteor

 

Hope it helps.

[ArchieHood 3,692]

Here you go lazybones .....http://lmgtfy.com/

[davyt63 1,845]

thanks lads!

 

regards

 

davy

[davyt63 1,845]

Here you go lazybones .....http://lmgtfy.com/

 

 

VF

[stealthy1 3,964]

Here you go lazybones .....http://lmgtfy.com/

 

 

[cunninghamb 2]

I knew it needed a bit of work lol. One of the fore end washers was taped to the outside of the box matey, mum decided to re-package it while I was at work

 

All The Best

Edited May 22, 2010 by cunninghamb

[stealthy1 3,964]

How's the project going Davy? are you ready for an update yet

[davyt63 1,845]

I knew it needed a bit of work lol. One of the fore end washers was taped to the outside of the box matey, mum decided to re-package it while I was at work

 

All The Best

 

 

hi blair

that was lucky was going to throw the box tonight,thats saved the project £4.00 then

 

thanks again

 

buddy

 

 

How's the project going Davy? are you ready for an update yet

 

 

hi stealthy

its going well at the mo,just finished sanding the stock!

over all its not in bad condition .apart from the internals

will get some pics up later

 

regards

 

davy

[stealthy1 3,964]

I knew it needed a bit of work lol. One of the fore end washers was taped to the outside of the box matey, mum decided to re-package it while I was at work

 

All The Best

 

 

hi blair

that was lucky was going to throw the box tonight,thats saved the project £4.00 then

 

thanks again

 

buddy

 

 

How's the project going Davy? are you ready for an update yet

 

 

hi stealthy

its going well at the mo,just finished sanding the stock!

over all its not in bad condition .apart from the internals

will get some pics up later

 

regards

 

davy

 

 

[davyt63 1,845]

here ya go lads

 

http://www.thehuntinglife.com/forums/index.php?showtopic=155644

 

regards

 

davy