trappsy 0 Posted May 13, 2010 Report Share Posted May 13, 2010 (edited) Just zeroed the new scope on my brno 452 .22 lr, eley subs grouped in and immedieatley around the bull at 60 yards, moved target back to 100 yards and loaded mag with RWS Hvs, first 2 bang on just touching each side of the bull, I was well chuffed, next 3 were miles away!why? is this the nature of high velocity .22 ammunition,? if so is there a better cartridge than RWS Hvs that are more stable, cheers. Edited May 13, 2010 by trappsy Quote Link to post
SNAP SHOT 194 Posted May 13, 2010 Report Share Posted May 13, 2010 could be powder variations, within the case... seating depth's. etc.. the list is endless... but mainly some brands of .22lr ammo are very poor when it comes to uniformity of each case.. hope this helps. Snap. Quote Link to post
clint 45 Posted May 13, 2010 Report Share Posted May 13, 2010 most h/v is same , try remmington, this is joke ! Quote Link to post
matt_hooks 188 Posted May 14, 2010 Report Share Posted May 14, 2010 .22LR HV stuff isn't normally that unreliable. The target guys will make one hole groups at 100 yards. The only thing is that at the extremes of their range they can be very prone to windage, a slight variation will make a huge difference. Quote Link to post
theinvisiblescarecrow 0 Posted May 16, 2010 Report Share Posted May 16, 2010 With subs zero'd at 60yds I'm 1.1/2 milldots down at 100yds, with HV's I'm 1/2 a mildot down at 100yds with the scope left as it is. H/V's are a bit wayward so I'd rather use subs. Quote Link to post
rioulike 2 Posted May 21, 2010 Report Share Posted May 21, 2010 hi,i have tryed cci mini mags,remmington high v and tryed a box of winchester lazer found none to as acurate as winchester subs in my cz bolt. Quote Link to post
flytie 1 Posted May 23, 2010 Report Share Posted May 23, 2010 It semms that you need to try every make of cartridge/shell that you can to find out what suits your rifle. My .22rf likes Eley Match, hates Stingers etc. I wouldn't write high velocity rounds off so soon, just keep trying different makes. ft Quote Link to post
allydog 4 Posted May 23, 2010 Report Share Posted May 23, 2010 just keep to subs and learn your distances,drop,etc HV's known to be a bit fussy Quote Link to post
Deker 3,478 Posted May 24, 2010 Report Share Posted May 24, 2010 Magtech 40g HP Subs at 60 yards gave me very close to a 100 yard zero with CCI Velocitors, but HV and .22lr are not commonly mentioned together when talking accuracy! Quote Link to post
matt_hooks 188 Posted May 25, 2010 Report Share Posted May 25, 2010 I don't understand all these statements that .22LR HV rounds aren't accurate. Go talk to a 3P shooter, or a biathlon competitor! I can quite happily clover leaf a 3 round group of .22 LR HV's at 100 yards given favourable conditions (like a nice indoor range). Quote Link to post
Deker 3,478 Posted May 25, 2010 Report Share Posted May 25, 2010 I don't understand all these statements that .22LR HV rounds aren't accurate. Go talk to a 3P shooter, or a biathlon competitor! I can quite happily clover leaf a 3 round group of .22 LR HV's at 100 yards given favourable conditions (like a nice indoor range). You will be talking about something up to 1250(ISH) ft sec and solid I suspect...try a CCI Stinger and you will be lucky to get 3 in the same county at 100 yards!! ATB!! Quote Link to post
matt_hooks 188 Posted May 28, 2010 Report Share Posted May 28, 2010 In theory the HV rounds should give better performance than the nurmal velocity ones. The main issue with .22 lr accuracy is the transition from super to sub sonic. That transonic zone causes all sorts of unpredictable flows around the bullet, and can knock it significantly off the intended course. The HV (high and hyper) should still be supersonic at ranges up to about 100 yards, so should get over the problem. Of course some bullets will never be accurate, no matter how fast you chuck them, but if you get the right round you should be fine. The subs seem to perform remarkably well, I often get better accuracy out round the 60 yard mark with subs than normal velocity rounds. I wonder if the method of ignition is relevant to accuracy? The rimfire, by definition, gives an uneven burn of the charge. I wonder if striking the rim simultaneously in several places would give a more even burn and therefore better accuracy? I know that petrol engines run much smoother when they have doubled ignition systems, as the flame front is far more uniform! Hmmm, wonder if anyone has ever tried it? Quote Link to post
Deker 3,478 Posted May 28, 2010 Report Share Posted May 28, 2010 In theory the HV rounds should give better performance than the nurmal velocity ones. The main issue with .22 lr accuracy is the transition from super to sub sonic. That transonic zone causes all sorts of unpredictable flows around the bullet, and can knock it significantly off the intended course. The HV (high and hyper) should still be supersonic at ranges up to about 100 yards, so should get over the problem. Of course some bullets will never be accurate, no matter how fast you chuck them, but if you get the right round you should be fine. The subs seem to perform remarkably well, I often get better accuracy out round the 60 yard mark with subs than normal velocity rounds. I wonder if the method of ignition is relevant to accuracy? The rimfire, by definition, gives an uneven burn of the charge. I wonder if striking the rim simultaneously in several places would give a more even burn and therefore better accuracy? I know that petrol engines run much smoother when they have doubled ignition systems, as the flame front is far more uniform! Hmmm, wonder if anyone has ever tried it? The ignition method you raise will have little or no effect by the time the bullet exits the barrel! The twist rate of the barrel is significant, the .22lr was developed just after Noah took the animals away from the flood....it was never intended as a high velocity, modern powders tool...there lies the issue!! Obviously different ammo performs differently whatever in each barrel, and many will eventually be able to find an acceptable HV round, but with the 1-16 twist (the majority of .22lr) and length/weight of many .22lr bullets, Sub sonic rules!! Quote Link to post
andyf 144 Posted May 29, 2010 Report Share Posted May 29, 2010 Just zeroed the new scope on my brno 452 .22 lr, eley subs grouped in and immedieatley around the bull at 60 yards, moved target back to 100 yards and loaded mag with RWS Hvs, first 2 bang on just touching each side of the bull, I was well chuffed, next 3 were miles away!why? is this the nature of high velocity .22 ammunition,? if so is there a better cartridge than RWS Hvs that are more stable, cheers. OK From my experience of .22 HV, try Winchester Lazer, I have used them in at least 4 different rifles, and they came in with excellent grouping in all cases. I must say that I don't use any HV .22 rimfire these days, just Subsonic. But the 'Lazer' where the best by a mile, only the 'new' CCI Velocitor were in the same class, but more expensive! I think (my opinion only) is that a longer barrel 21"+ is an avantage with HV, my rifle (SAKO Finnfire Varmint) is cut-down to 16", and is a tack-driver with Sub's. Best of luck!! AndyF Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.