Sights

[1888andybhoy 7]

Hi lads,

How do i take the front sight off a Norica model 56 to get it threaded for a silencer ?

 

 

Andrew

[festa 206]

mate please dont take this the wrong way but to be honest i wouldnt bother it will probably cost you more to get it threaded than you paid for the gun ...what might be a better option was when you get the iron sight off try and get a slip over silencer it saves having to thread the barrel is is probably alot cheaper .. the iron sights are either a perminate fixture or probably held in place with a small grub screw

 

atb gary

[Marksman 934]

mate please dont take this the wrong way but to be honest i wouldnt bother it will probably cost you more to get it threaded than you paid for the gun ...what might be a better option was when you get the iron sight off try and get a slip over silencer it saves having to thread the barrel is is probably alot cheaper .. the iron sights are either a perminate fixture or probably held in place with a small grub screw

 

atb gary

 

 

what wor kid says mate.....

 

if it has the circular cover on slide it off and if you look just behind the blade there should be a small indentation where you will find a small grub screw, you will probably need to use a precision screwdriver to get into it, undo that then very gently with a plastic hammer or similar tap towards the front of the barrel until it slides off.

 

Darryl

[Phantom 631]

Or if its held on the same way my foresight was (plastic all around and round the barrel) you can either heat it up and pull it off OR like I did, whatck it with a mallet in the off direction

 

But dont do what I did and let it fly off into my very deep garden fishpond, cuz it sunk and I've not seen it since. Not that I need it like!

 

Phantom

[davyt63 1,845]

Or if its held on the same way my foresight was (plastic all around and round the barrel) you can either heat it up and pull it off OR like I did, whatck it with a mallet in the off direction

 

But dont do what I did and let it fly off into my very deep garden fishpond, cuz it sunk and I've not seen it since. Not that I need it like!

 

Phantom

 

 

 

scuba1 would be able to get that for ya tony