Phantom 631 Posted March 27, 2010 Report Share Posted March 27, 2010 i tried promethius pellets years and years ago and found they left a plastic coating inside the barrel i would hope they have sorted that problem out as it led to some dodgy jams I had the same problem with them in my pistols. I tried them in the rifle, purely to see the penetration of the .22 at 11ft/lbs. Like I said earlier, still got the 4 tubs of them Feel guilty for not using them as they were an xmas gift from my lad. Phantom Quote Link to post
ngbacon 0 Posted March 28, 2010 Report Share Posted March 28, 2010 i tried promethius pellets years and years ago and found they left a plastic coating inside the barrel i would hope they have sorted that problem out as it led to some dodgy jams i used promeatheus to but they didn,t ;leave any lead coating on the barrel they were accurate though Quote Link to post
clubshot 22 Posted March 31, 2010 Report Share Posted March 31, 2010 (edited) Pax Guns Brought out Dynamic Tin Pellets years ago As advised in 90's that Lead would be Restricted by 2000 http://www.airgunpellets.com Promethues are made for Unchoked Rifles - Pellets with Plastic Skirts Never happened so continued and brought out Lead Versions As Exterminators / Logun Penetrators Also Rangemasters for Daystates And Own Defiant Range - http://www.defiantpellets.com Just Launch the New Zinc .22 Round through SMK - as they wanted a .22 Round for their Range of springers Call ThUnder Bolt - comes out @ 10.00 Grains - Boxed in 400 for around £9.99 Yes a .177 Version is due in next month or so @ 5.00 Grains Tin , is to Expensive these Day's and Pax is currently working on Zinc Air Gun Pellets Which are worked in manufacture To be near as Soft as Lead There is a Forum Board on Defiant Web site BOB/R Edited March 31, 2010 by clubshot Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.