Jump to content

GUNTUFF range finder


Recommended Posts

hi every one

as i dont carry my range finder in its case, i have it attached to a lanard on my jacket for quick ranging.well today i came up with a little tip. as it got very wet and was unable to see through it later on.its a little blue peter-ish :laugh: but will stop it getting wet and dusty :thumbs:and stop any grit getting in.

now i know there is a few of you who have them on here! so thought it was worth doing this! :thumbs:

plus i was bored :tongue2:

 

so here is what you need

 

one evian bottle top

 

some black insulation tape,or a black bottle top even better!

 

and a lanard or thin shoe lace

 

and a guntuff range finder

 

ABCD0012-17.jpg

 

firstly you need to fold the cord,then put through where the other cord is.this you will need a small screwdriver to feed through and hook out!

and loop it over like so!

 

ABCD0013-18.jpg

 

then take the bottle top and put a 3mm hole in the center of it,(in my case)

then tape up with black tape like so!

 

ABCD0001-31.jpg

 

now put both ends through the hole,and tie a knot it it and cut of any access.

and there you have it.adust cap which you can take of and let fall free till needed :thumbs:

 

ABCD0003-26.jpg

 

 

and you have a nice snug fit :thumbs:

 

ABCD0002-22.jpg

 

ABCD0004-27.jpg

 

 

regards

 

davy

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...