Deben ferret finders

[longdog13 36]

God this is confusing think I'll leave it thanks for all input tho

 

It really isn't that difficult

[andy_browning 0]

One model works to a max depth of 8ft and the other model to a max depth of 15ft

 

ATB

if this dunt explain it then nothin is gunna!!!!!

[oohmydog 82]

One model works to a max depth of 8ft and the other model to a max depth of 15ft

 

ATB

if this dunt explain it then nothin is gunna!!!!!

just to make it more confusing the mark 1 box only went to 8ft but when you used a 15ft callar you double the depth ie if it shows 4ft it is really 8ft if you had the 15ft collar on ?????? sorry

[wilson4347 5]

One works up to 8 feet the other to 15 feet, they both do the same job, the 15 feet just has a wider locating band, Even my ferret understands this

[jf1970 328]

One model works to a max depth of 8ft and the other model to a max depth of 15ft

 

ATB

if this dunt explain it then nothin is gunna!!!!!

just to make it more confusing the mark 1 box only went to 8ft but when you used a 15ft callar you double the depth ie if it shows 4ft it is really 8ft if you had the 15ft collar on ?????? sorry

 

i didn't know that an 8ft box could locate a 15ft collar at 15ft

[barni 4]

the mk1 only works to a depth of 8ft... its the mk3 that works to a depth of 15ft, but how ever if u have a mk3 collor and a mk1 locator u will be able to locate ur ferret upto 15ft ... but if u have a mk3 locator and a mk1 collor u wouldnt find it at all... hope this helps

ATB Danny

how can you of an 8 ft box

[PETEWINN 5]

No wander you are confused, I am by most of the replies and I know my stuff.

 

The difference between a Mk1 15ft locator and a Mk1 8ft locator in laymans terms is purely the sticker on the wheel.

 

If you use an 8ft collar with an 8ft sticker then its reads right.

If you use a 15ft collar with an 15ft sticker then its reads right.

If you use an 8ft collar with an 15ft sticker then you need to half the reading.

If you use an 15ft collar with an 8ft sticker then you need to double the reading.

 

If you use a Mk2 20ft collar or Mk3 16ft collar then the readings are all over the place. No easy way to estimate.

 

Hope this clears up some of the confusion.

[Brimmer 220]

Just start digging is my advice! you'll be there sooner than knowing how far down you have to dig!