Jump to content

ferret box


Recommended Posts


i was thinking of making a ferret box and i was just wonder if use could tell me what material do use and have use got any pans because i cant seem to find any on the Internet ??

ATB

Rory

 

look on my profile mate there some pics in there of the ones i make.

  • Like 2
Link to post

i was thinking of making a ferret box and i was just wonder if use could tell me what material do use and have use got any pans because i cant seem to find any on the Internet ??

ATB

Rory

 

look on my profile mate there some pics in there of the ones i make.

 

 

hi mate nice boxes , what the prices please

Link to post

You will soon think up a plan when you have some materials in front of you, or make it up as you go along.

Depending on what tools you have available to you and how handy you are with them will obviously determine the level of finnish you are going to achieve.

Ideally 9mm far eastern ply, this will cost you about £30 plus a sheet. It will make your box lightweight, the last thing you want to be humping about when you have a good bag of rabbits is something equivelent to your grandmas best mahogany cabinet.

Whatever you make it out of just make sure its safe and comfortable for your ferrets and you, and make sure you treat it with a good varnish.

Its all a good learning curve. Its amazing what you can knock up with half a dozen pieces of 2x2 and some 6" nails LOL

Link to post

i was thinking of making a ferret box and i was just wonder if use could tell me what material do use and have use got any pans because i cant seem to find any on the Internet ??

ATB

Rory

 

here's one i had knocked up a few weeks ago,it's 10"long 8"wide and 8" deep ,4 hindges,about 30x50mm screws , 2 hindge locks,2 snap pins tied onto locks so i can't lose them,1 sheet of 6mm ply and a seatbelt strap from an old car.knocked up in about 1hr,All at a cost of around 30 quid,still have enough ply to make another 3 or 4 double boxes.And it was my first time to make one.atb thumbs.gif

 

Link to post

i was thinking of making a ferret box and i was just wonder if use could tell me what material do use and have use got any pans because i cant seem to find any on the Internet ??

ATB

Rory

 

here's one i had knocked up a few weeks ago,it's 10"long 8"wide and 8" deep ,4 hindges,about 30x50mm screws , 2 hindge locks,2 snap pins tied onto locks so i can't lose them,1 sheet of 6mm ply and a seatbelt strap from an old car.knocked up in about 1hr,All at a cost of around 30 quid,still have enough ply to make another 3 or 4 double boxes.And it was my first time to make one.atb thumbs.gif

 

 

 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...