not happy with new pellets

[ulverston moocher 60]

Well dicided to try some new pellets after reading on here that alot use them and get great results the pellets were aa field diablo's in 177 for my aas410 I have allways used acupell but fancied a change so off I went with my new pellets to my small holding to set my sights to the new pellets opened the tin and every pellet is in piss poor condition all the skirts are out of shape and dissformed and half wouldnt fit in the mag.I just wondered is this a one off or have outher people had this as well I know that every tin of pellets has a few but this full tin is f****d some more than outhers but none are perfect if its a one of il stick with them and try anouther tin but if they are regularly in this condition im going back to the acupell cheers for reading guys and look forward to your replies.

ATB

Moocher.

[festa 206]

i used them in my pro sport but in .22 and i loved them mate never had a problem like that i would of taken them back to the shop sounds like a dodgy tin ... im using bisley mags in my .177 s510 but im still considering jsb for my next tin ....

 

 

atb gary

[ulverston moocher 60]

cheers gary im thinking of taking them back in to show them at the shop but it isnt realy there fawlt if its not a comon thing il stick with them and try anouther tin thanks again mate.

 

moocher.

[zini 1,939]

Take them back Moocher pal.

 

Pellets should not be sold in a poor condition like that.

 

Si

[JackReid 35]

cheers gary im thinking of taking them back in to show them at the shop but it isnt realy there fawlt if its not a comon thing il stick with them and try anouther tin thanks again mate.

 

moocher.

 

Hello mate, I used to use these little fellas or RWS Superfield which are exactly the same as the AA diablo fields... The skirt is a soft one but thats part of their accuracy and adaption to the barrell I feel. However I havent had a bunch as bad as that, I can put up with the odd ruined one or whatever but they are expensive buddy and I would go back to the shop and exchange them. The guys at the shop wont have a problem if you explain you know its not their fault; but at the same time they arent fit for use. Plus they will just send them back to the manafacturer themselves as I'm sure its not unheard of back at the main depots.

 

Let us know what you do

 

Jack

[zini 1,939]

Good advice that Jack

 

Si

[davyt63 1,845]

as above send em back!

 

regards

 

davy

[ulverston moocher 60]

yeh think il run them back tuesday because im gonna get the smk led tactical lamp from the same place so will kill 2 birds with 1 stone and see what they say there not bad lads so cant see there being a problem with returning them cheers lads.

ATB

moocher.

[Buster321c 1,010]

I aint bein funny lads , but the shop will say ` They were ok when you had em ` I cant see the changin a tin .

[jasper65 6]

I can't say I rate them too much with this particular gun! I used the AA Diablo's 4.52'S, also used the JSB Exacts 4.52's and both seem to have a good few flyers, plus as posted above there was a good few well out of shape in the AA tin...

 

Finally tried some Barracuda's which although are a bit heavier are pretty stable in this rifle.....

 

atb

 

Jasper

 

 

[venomviper 129]

hi ya buddy

do what i did send them back i got a tin the other day for this theoben evo and like you said skirts bent / flat just no good at all buddy i took mine back to the gunshop and show my mate there he wasn't happy about it either so he gave me my money back but i am using bisley mags in all my guns now and for some reason each and everyone of the guns is liking them really well buddy.

 

regards

 

shay

[festa 206]

shay's right bisley's all day every day in the .177

 

atb gary

[venomviper 129]

hi ya gary

i crono'd the tx200hc while i was out on saturday matey she is doing 11.6flbs on them bisley mags smooth as well which made me think of your prosport buddy you had a bipod on that one didnt ya ? i was thinking while i was in my workshop or shed as the wife calls it about using a bipod i have to make a dampa mount fittment to it to take the recoil so we could use them on springers with low recoil like the air arms or hw's plus it gets me from under her feet to lol just wanted to know what attachment you had on yours matey ? and if you still have it ?

 

regards

 

shay

ps

yes gary bisley mags all day every day matey good all round pellet and good stopping power but not to good on close range quarry and they tend to go through

[Phantom 631]

Send them back and tell the shop "They are unsuitable for the purpose" that you bought them for

If they refuse to exchange or replace them; then they are breaking the law and you then contact Trading Standards.

 

It may not be the fault of the shop, but your contract is (in the eyes of the UK law) with the person/shop that you paid for them.

 

The shop will (probably) be happy to exchange or refund them for you.

I use AAF's most of the time and as with any other manufacturers I've tried there have been the odd one or two (maybe more) that have been damaged.

But a full tin? I would deffo take them back

 

Phantom

[yellow belly 0]

this is what happend to me when i first got a tin of them, but in .22! take them back and get a good tin of them, i always open them in th shop now before i leave so if there shit i can get a different tin there an then!!