Jump to content

terrier box


Recommended Posts


Guest fence_hopper

i built a small hutch out of 12mm ply it weighed a ton for it's size, they are nice though mate, i built one out of five mill ply last week very light and strong glued all the joints thin nails with a few screws to reinforce where needed. it must of done the trick coz its solid i drop it on the floor didnt make any difference. also mate good price i dont know how you do them for that, a bargain

Link to post

i built a small hutch out of 12mm ply it weighed a ton for it's size, they are nice though mate, i built one out of five mill ply last week very light and strong glued all the joints thin nails with a few screws to reinforce where needed. it must of done the trick coz its solid i drop it on the floor didnt make any difference. also mate good price i dont know how you do them for that, a bargain

hi mate the one sam add was made out of 15mm plywood and it olny weighed 20kg so there not to bad and im not out to rip any one off and evey time i make somthink out of wood it makes my wood working skills better as im doing a collage cores at min for joinery
Link to post
Guest fence_hopper

dont worrie mate i aint knocking you, the lads are getting a bargain, them boxes are spot on. your most probably alot better than me, even though i like doing abit now and again, this is the one i built last week first ever one thats why i can see how much you guys put into them :thumbs:

terrierbox008.jpg

terrierbox009.jpg

box2021.jpg

Edited by fence_hopper
Link to post

dont worrie mate i aint knocking you, the lads are getting a bargain, them boxes are spot on. your most probably alot better than me, even though i like doing abit now and again, this is the one i built last week first ever one thats why i can see how much you guys put into them :thumbs:

terrierbox008.jpg

terrierbox009.jpg

box2021.jpg

nothing rong with that mate you dun a top job of it pal how long did it take to make
Link to post
Guest fence_hopper

about a day mucking about with building painting finding the little things for the corners and the ferret latches things lol. but i would say to anyone thinking of being a tight c**t like me and making one save yourself the hassle lol and get one of deaken, you want be far of with time materiels to the price deaken sells them.

 

your boxes are a bargain mate for that price, a good price for a good box :thumbs:

Link to post

about a day mucking about with building painting finding the little things for the corners and the ferret latches things lol. but i would say to anyone thinking of being a tight c**t like me and making one save yourself the hassle lol and get one of deaken, you want be far of with time materiels to the price deaken sells them.

 

your boxes are a bargain mate for that price, a good price for a good box :thumbs:

thanks for that pal
Link to post

about a day mucking about with building painting finding the little things for the corners and the ferret latches things lol. but i would say to anyone thinking of being a tight c**t like me and making one save yourself the hassle lol and get one of deaken, you want be far of with time materiels to the price deaken sells them.

 

your boxes are a bargain mate for that price, a good price for a good box :thumbs:

Im the same mate, made my own which only cost 25 quid for the exterior ply, half a day making it and the other half finding fixings and fittings!

Yours are a bargain..

post-13000-12654665041_thumb.jpg

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...