logun

[Delly 0]

seals have started to leak on logun gladiator where you import air in to gun wonder if this is a long job to rsepair thanks lads

[zini 1,939]

That’s really funny that you have said that pal.

 

I owned a FX Verminator (same as a Gladiator apart from being a slight bit smaller) for about 2 to 3 days and mine did the same thing.

 

I got rid of mine as I lost faith in the company.

 

It’s easy to fix though as I found out after looking on the internet.

 

All you do is as follows:

 

1. Take the bottle off, so there is no air in the rifle.

 

2. Unscrew the filler port on the end of the other air res. (Where your filler probe goes into).

 

3. You will see a small screw or nut if I remember right.

 

4. Remove that and there is the rubber seal.

 

5. Look at the seal, as it either as dust under it or damaged. If it is damaged you need to order a new one from FX or Deben. If its only dust then just wash it, dry it and lube it before putting it back.

 

6. Job done, rifle fixed.

 

Zini