Jump to content

Recommended Posts

i'm hoping someone can put me out my misery i took some pic's last week

& went to put them on the PC via the usb there was 2 pics already on

from a earlier walk which trans fared no problem but not the most

recent so i tried again & the import wizard said there was no pics on the

device yet i can review them on the camera.As you may have guessed i'm

new to all this & kind of feeling my way in so any help would be

greatly appreciated.ATB Pritch

Link to post
Share on other sites

what you can do is connect the lead to the camera & usb, then click on my computer , then lok at the removable drives , i cant remember which one it will be , but your pics will load onto the drive thats for your camera

 

Just right click the drive & open it , your photos should come up that way , you can save them from there

Link to post
Share on other sites

just tried that kay but it just says there are no pics on the

camera thanks anyway i'll have to give the card reader a go

 

 

Is there a chance there on the internal memory if the camera has one , very strange if there still showing up on the camera but not when you connct it to the pc

Link to post
Share on other sites

i dont think so as if i take the card out it says no card & i

can't see the pics but i could be

wrong, the camera's a canon 350D

 

So the pics are still on the card , silly question perhaps but is the cable working ?

 

i had a problem loading from this camera when i first got it , the pc wasnt recognising the camera but i got them off in the end using the my computer & drives way

Link to post
Share on other sites

Is there a chance that you have switched to RAW setting instead of jpeg? If this is the case your PC may not be able to see them, (although it should if you have the relevant Canon software on your PC) but the camera will show the little jpeg preview on the rear screen.

 

Another possibility is that you have accidentally changed the camera's communication settings? There should be a print/ptp or PC connect setting.

 

I'm afraid I'm not totally familiar with the 350D, but another thought is that, if it is similar to my Canons, does it have a 2 position on/off switch? If so, it needs to be switched to the 2nd on position?

Link to post
Share on other sites

Is there a chance that you have switched to RAW setting instead of jpeg? If this is the case your PC may not be able to see them, (although it should if you have the relevant Canon software on your PC) but the camera will show the little jpeg preview on the rear screen.

 

matey i think you may have sussed it i am on raw so i'll have a play

& see if i can get it to work. let you know how i go on cheers

Link to post
Share on other sites

Is there a chance that you have switched to RAW setting instead of jpeg? If this is the case your PC may not be able to see them, (although it should if you have the relevant Canon software on your PC) but the camera will show the little jpeg preview on the rear screen.

 

matey i think you may have sussed it i am on raw so i'll have a play

& see if i can get it to work. let you know how i go on cheers

 

If you have a problem with getting the raw files on the pc. downlad picasa its free & that will sort the loading issue to the pc if you havent got a programme to deal with them :thumbs:

Link to post
Share on other sites

well it worked i had gone into the raw files. can i just say a big

thankyou to both kay & MuttleMCTuttle for taking the time to give

my problem some thought i'm a bit of a dinosour where technology

is conserned & you have saved me a lot of time & head scrathing

A BIG THANKYOU TO YOU BOTH your a credit to the site.ATB Pritch

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...