whippeter69 88 Posted January 7, 2010 Report Share Posted January 7, 2010 Couls someone tell me what they use as fox snare anchors. If i have a run between two trees or by a fence post i normally nail 3 fencing nails into the post or tree and hoop the snare with through there. But i have a few new snaring sots where i need an anchor to snare the fox's, could anyone shead some light? Quote Link to post
00taz11 39 Posted January 7, 2010 Report Share Posted January 7, 2010 (edited) . Edited January 7, 2010 by 00taz11 Quote Link to post
whippeter69 88 Posted January 7, 2010 Author Report Share Posted January 7, 2010 Anyone? Quote Link to post
super_si 0 Posted January 7, 2010 Report Share Posted January 7, 2010 how do u no were a fox has come though then woods what am i looking for,, and whats the best way of snaring a fox foing under a fence??? Quote Link to post
Ideation 8,216 Posted January 7, 2010 Report Share Posted January 7, 2010 To be honest i just use bloody great long pieces of metal. . . . . . i think they were part of a fence once upon a time. They are strong as f**k, and when bent into a hoop at one end (takes some doing) and cut to about a couple of feet and driven into the ground . . . . . no ones getting away! Quote Link to post
Ideation 8,216 Posted January 7, 2010 Report Share Posted January 7, 2010 Super si - your looking for prints (especially now in the snow), the stench of fox, red fur on fences etc and a larger than rabbit game trail . . . . . at least thats what i look for, im sure there are more signs. O and of course fox kills. I find it better to set on the trail leading up to or away from fence. Hope that helps. Jai. Quote Link to post
super_si 0 Posted January 7, 2010 Report Share Posted January 7, 2010 im seeing prints that are like small dog paw prints and theres a pair side by side then 1 gose stray then meet up again but i havnt got anything that will do the job or will a 6 ply snare trap a fox if its on somthing solid thats not going budge Quote Link to post
Ideation 8,216 Posted January 8, 2010 Report Share Posted January 8, 2010 I wouldn't use the 6 ply. It probably wont hold and even if it did it wouldnt be humane. . . . it's snap at some point possibly sunk into the neck. Make a decision what you want to snare and use the right tools for the job. Nothing wrong with snaring fox, but use fox snares. Look on google images for pics of fox prints and compare them. Make sure you know what crosses your land - i.e is it possible that it IS a small dog or a cat or other domestic animal. Check it's not badger. Do you know if there is a earth on your land? Do you find only rabbit heads left in your snares? Quote Link to post
Ideation 8,216 Posted January 8, 2010 Report Share Posted January 8, 2010 if your bored you could make a catch alive trap for the fox. Quite a fun project. Quote Link to post
super_si 0 Posted January 8, 2010 Report Share Posted January 8, 2010 no mate nothing all gone but no sign of a badger in the snow but fox prints and rabbit,, iv got some fox snares being knocked up for me see how that goes Quote Link to post
ellir0305 9 Posted January 8, 2010 Report Share Posted January 8, 2010 Couls someone tell me what they use as fox snare anchors. If i have a run between two trees or by a fence post i normally nail 3 fencing nails into the post or tree and hoop the snare with through there. But i have a few new snaring sots where i need an anchor to snare the fox's, could anyone shead some light? here you go mate, a link to snaremans earth anchors article. should be exactly what you want but might be tricky to get into the ground in this weather. atb rob ps. a 18-24" bit of angle iron cut to a point on one end driven right into the ground with a big hammer and a hole drilled in the other, connected to the snare with one of the quickclips (see the above link) works well too Quote Link to post
MR TEA POT 1,287 Posted January 8, 2010 Report Share Posted January 8, 2010 Here's what i use....pm woodga he will sell you a few. Quote Link to post
cornishtrapper 3 Posted January 8, 2010 Report Share Posted January 8, 2010 Here's what i use....pm woodga he will sell you a few. how the hell do you nock that into the ground ? Quote Link to post
120-2 8 Posted January 9, 2010 Report Share Posted January 9, 2010 I use Iowa Earth Anchor made by a local fabricators. Quote Link to post
The one 8,477 Posted January 9, 2010 Report Share Posted January 9, 2010 Thats the same as what i use got a welder to run a few up for me Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.