jono88 0 Posted December 1, 2009 Report Share Posted December 1, 2009 hi i was just wonderin if anyone knows how to remove the bottle on the daystate air ranger cheers Quote Link to post
Adam16 1 Posted December 1, 2009 Report Share Posted December 1, 2009 its quite complicated you have to empty it fully (shoot it off) when it gets to 50bar odd it will empty itself. then take off the stock and shroud and pressure gauge, put it in a vice (with rubber padding either side) then use a strap to undo the bottle and it is on tight. dont attempt to do it if your not 100% sure and make sure the gun is empty before even thinking about getting the bottle off i did a swap with another bloke who took the bottle off for me while i watched so these are my notes from what he did. then when you put the new one on or the original back on use some molycote grease on the oring you might want to put a new oring in as well. Hope this helps cheers adam Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.