Loguns16 mk1

[hilly 6]

Hi all I have been out with my Logun 16s mk1 and was setting the sights.

When looking though the sights I could watch the pellet come out of the gun and drop very short of the target, just like a great drop in power.

So being thick I cocked the gun and kept on fireing in the end the gun just stopped fireing and it seemed as if I had took the air cylinder off.

Got home and put a gun cleaning rod down it 3 pellets came out but with the air put back on it still wont fire and still seems like the air is not on, it all seems to cock ok etc but no fireing, there is about half a tank of air left so I know thats ok.

Anyone had this before and know what I can do?

Many thanks,

Hilly.

[Adam16 1]

try it on a full charge make sure the bottle is on properly check that the o ring is ok if not then may have to go to a gun smith, may need a service.

Adam

[77 si 21]

Had a similar problem with my logun solo not to long ago. So I tried it on a full charge and the problem went away keep us posted I would be interested to know how you get on.

 

ATB getting your gun fixed

 

Si

Edited November 27, 2009 by 77 si

[hilly 6]

Thanks guys I have dropped the gun off at the shop to see if they can find the problem.

Will post up when I know what it was.

Hilly

[hilly 6]

Still no news yet, I have been in and asked about the gun but I have been told that they haven't had time to look at it (anyone know of a gunsmith in the cambs area?)

All I want is the gun back I keep looking out the window and want to get out there

[hilly 6]

Been into the gunsmiths again today and have been told that its going to be 3 weeks before anything will be done with the gun as he said there is only 2 people in the country that have spares or can work on them as Logun wont do any work on them

[RaiderBoy 19]

Been into the gunsmiths again today and have been told that its going to be 3 weeks before anything will be done with the gun as he said there is only 2 people in the country that have spares or can work on them as Logun wont do any work on them

 

dont feckin listen to them mate, there having you on there. i know i have had the same done to me i went to neath gun shop in south wales and asked about getting a silencer adaptor for my webley raider 10 and they told me to come back in 3 weeks and they would have it at a price of £35. when i returned 3 weeks later they had not even bothered to source the bit and tried to sell me some bisley silencer for a rediculous amount of money because they claimed that webley had gone out of buisiness so i did a little search on the internet and found the bit in about an hour and it was only £17 including delivery, when i told them of this, they wouldent belive me and sold me a 1/2 unf swift precision moderator for only £30 and so far its the best mod ive ever seen even beating the weirauch one.

 

Richard

[hilly 6]

Been into the gunsmiths again today and have been told that its going to be 3 weeks before anything will be done with the gun as he said there is only 2 people in the country that have spares or can work on them as Logun wont do any work on them

 

dont feckin listen to them mate, there having you on there. i know i have had the same done to me i went to neath gun shop in south wales and asked about getting a silencer adaptor for my webley raider 10 and they told me to come back in 3 weeks and they would have it at a price of £35. when i returned 3 weeks later they had not even bothered to source the bit and tried to sell me some bisley silencer for a rediculous amount of money because they claimed that webley had gone out of buisiness so i did a little search on the internet and found the bit in about an hour and it was only £17 including delivery, when i told them of this, they wouldent belive me and sold me a 1/2 unf swift precision moderator for only £30 and so far its the best mod ive ever seen even beating the weirauch one.

 

Richard

 

 

Problem is he told me the gun has been sent away for repair and not in the shop, so if i wanted to i couldn't pick it up and go to another place, so far im not to happy with this place.

On another note nice looking ferret in your pic

[hilly 6]

Right been into the gun shop again today and guess what the gun has been looked at already .

Anyway I have been told that the firing valve has bust and it needs to be replaced so it should be back by the weekend I hope.

[hilly 6]

Guns back and fireing at 11.8 and seems good, now to get out this weekend

[LOGUNSOLO177 0]

Glad you got it sorted mate!!

[hilly 6]

Glad you got it sorted mate!!

 

 

Thanks mate, cant wait to get out for a couple of hours this weekend.