vitalspark 4 Posted May 28, 2011 Report Share Posted May 28, 2011 For my first post on the forum here's a standard 1" sight-in target I made based on diamond style targets sitting within a 1" grid. I normally print onto A3 so I've had to compromise to allow a fit onto A4, but 1" pattern is less than 5% out. Set your margins all to zero and ignore any pop ups to do with being outside of print area. Bit of tape to stick the two halves together and you're done. sight-in targetpdf online.pdf 1 Quote Link to post
willum 89 Posted May 28, 2011 Report Share Posted May 28, 2011 i use 4 peices of a4 stuck together draw a black line down the creases where the papper joins this gives you the centre point then mk a 1" line at centre point take out and fix to peice of ply (i use staple gun to secure ) n shoot away with it being all white n large you can see where your shots going hi low left or right then after a few shots take a black marker pen with ya and n just cross out the holes from your zeroing or use white electrical tape to cover them up works for me hope this helps. Quote Link to post
fireblade_rrw 20 Posted August 7, 2011 Report Share Posted August 7, 2011 How about this for a homemade set-up? Something ive thought about for a while now. Or there's this new stuff on the market for about £20 1 Quote Link to post
GEOFF.223 83 Posted November 16, 2012 Report Share Posted November 16, 2012 i like to print out a target which says INCOME TAX then i shot until there is no paper left Quote Link to post
Varmint-jambo 2 Posted February 19, 2013 Report Share Posted February 19, 2013 Thanks for all the I will give them a go cheers Quote Link to post
bbjaccov5 4 Posted August 3, 2013 Report Share Posted August 3, 2013 Hello, I always use this site: http://www.printtargets.net/ Here you can make youre own targets just the way you like it. Gr Jacco Quote Link to post
Darkie69 76 Posted March 24, 2014 Report Share Posted March 24, 2014 If you want a bit of variety go to www.beartoothbullets.com where they have a number of target downloads including a rabbit and Sergei (simples) htmhttp://www.beartoothbullets.com/misc/targets.htm I use the rabbit one to practice head shots at various ranges. Have fun Quote Link to post
Cedric 132 Posted April 1, 2014 Report Share Posted April 1, 2014 Shoot-n-see targets are good, just a white dot for the bull. Best of all you can make your own for next to nothing - just look on Youtube for info. Quote Link to post
toxo 160 Posted November 30, 2017 Report Share Posted November 30, 2017 Shoot n see targets are real easy. All you need is a sheet of card/paper, some clear tape and a contrasting can of spray paint. I've tried different combinations but the original flouro yellow and matt black paint I find to be the best. Simply cover the card/paper all over with the clear tape and spray with the paint. You'll need to scratch crosses on it when dry or whatever you want to aim at. I know I'm teaching granny to suck eggs for a lot of you but there are always newcomers coming along. Quote Link to post
kalmantihanyi 4 Posted October 24, 2018 Report Share Posted October 24, 2018 Thanks for sharing Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.