gunpower 0 Posted October 28, 2009 Report Share Posted October 28, 2009 can some one tell me where to get one of these plz? for gunpower stealth bottle. Quote Link to post
Lerk 0 Posted October 28, 2009 Report Share Posted October 28, 2009 search for 'talon owners group' and have a mouch about on there... there's one guy on there that makes uprated ones that don't suffer from blow-by Quote Link to post
223 cz 0 Posted October 28, 2009 Report Share Posted October 28, 2009 Have a look on (Best Fittings) website they might mate Quote Link to post
dig2dogs 2 Posted October 28, 2009 Report Share Posted October 28, 2009 try this guy mate drum@leupyscustomshop.co.uk hes a wiz with em trust me Quote Link to post
RaiderBoy 19 Posted October 28, 2009 Report Share Posted October 28, 2009 Have a look here mate http://www.gunspares.co.uk/default.asp Richard Quote Link to post
maty j 6 Posted October 29, 2009 Report Share Posted October 29, 2009 What's wrong with It mate? Gunpower UK will sell you them anyway. Have you got the main valve body that the brass face screws Into, the spring preload adjuster and the spring?? Quote Link to post
gunpower 0 Posted October 30, 2009 Author Report Share Posted October 30, 2009 it keeps leaking from the part the top hat fits on Quote Link to post
8shot 191 Posted October 30, 2009 Report Share Posted October 30, 2009 try this guy mate drum@leupyscustomshop.co.uk hes a wiz with em trust me i agree he is a god in the air gun world atb Quote Link to post
maty j 6 Posted October 30, 2009 Report Share Posted October 30, 2009 it keeps leaking from the part the top hat fits on Do you mean the the little black derlin seal (were the valve stem pushes Into)? Quote Link to post
chimp 299 Posted October 31, 2009 Report Share Posted October 31, 2009 new seal will sort it , listen to matyj he has gone along way with his Quote Link to post
gunpower 0 Posted November 5, 2009 Author Report Share Posted November 5, 2009 it keeps leaking from the part the top hat fits on Do you mean the the little black derlin seal (were the valve stem pushes Into)? yes Quote Link to post
maty j 6 Posted November 5, 2009 Report Share Posted November 5, 2009 Can you see any signs of damage on It? Gunpower UK sell them. They never email you back but ring them up and they'll take the order over the phone. Min order of a tenner and the seals were 6 quid each when I bought mine. If you bought the rifle off him he'll send you one FOC. I had a stage where I went trough a few of them so have used up all my spares or I could of sent you one out. Drum sells his own at a tenner each. I had one of his and It blew out and he replaced It FOC so up to you where you get one from. Quote Link to post
Alexisrouzee 6 Posted November 24, 2009 Report Share Posted November 24, 2009 it keeps leaking from the part the top hat fits on Do you mean the the little black derlin seal (were the valve stem pushes Into)? yes i have just had some valve work and mainspring + custom hammer mod done by drum (leupys gun shop) and drum really is as good as they make out, hes very busy but always returns emails even if theres a few days wait, he made me a new valve, derlin tip, steel custom top hat (seals nicer) plus loads of extra work plus he found out that the front valve insert (as pictured behind top hat) was machined too big for the valve stem so after getting a replacment one from gunpower in ashford drum did the o ring mod on it and it is well and truly sorted now, nearly 0% air wastage!! worth an ask?? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.