new gun

[rushty 1]

Just bought my new gun . Wheirauch 100 S. I asked at the shop about fitting a bi pod and the guy says no probs, however when he takes the stock off he shows me that the stock is thin and might cause a problem in the future. Has any one had a bi pod fitted to this gun, cheers Ted.

[stealthy1 3,964]

Its not a problem mate if you want to get it done, Davy63 on this section has had his 100T done

[SEAN3513 7]

take the stock off..........fit the stud....if it comes through (which it might, only slightly), file it down flush with the wood cover it with some pvc tape, put stock back on....job done !!

 

the position of the stud is down to personal choice........i would reccomend about 3-4 inches from the front of the forend.

 

cheers

 

sean

[davyt63 1,845]

hi buddy

all you need to do is order one from maskells @ £9.99, thats a front bipod stud for the HW100,unscrew the old one and replace with the new one simples!!

hope this helps

regards

 

davy

[vizslahpr 0]

Hi Davy63 does that apply to a sling as well, am going to get a hw 100 soon (saving up) was told if i fitted a sling the warranty would be void, but i want a sling

[davyt63 1,845]

hi vizslahpr

i dont know who told you that buddy? but thats crap!!

but its a simple switch of studs.the one which is on there now is flush,this you just take out with a aalun key and replace with the new

bi-pod/sling stud,its as simple as that.you have to get the right stud though you cant put any old stud in there it has to be threaded

so the answer to your question is yes its ok!

hope this helps

regards

 

davy

[davyt63 1,845]

right lads!!

here is what you need

 

 

the stud on the left is the replacement stud which you can get from maskells,the one on the right is the original stud.

just switch them over,this stud you can fix a sling! to or a bipod! then the bipod has a stud on it to fix ya sling to

simples!!

regards

 

davy

[SEAN3513 7]

nice one davy.................top notch info buddy

 

atb

 

sean

[rushty 1]

Davyt63, been in touch with Maskells, job sorted thankyou. When i mentioned heiwrauch 100 they knew straight away what i wanted, spot on mate , cheers

[vizslahpr 0]

cheers thanks for the info Davy63, i will tell the guy in the shop he is talking crap

atb

[davyt63 1,845]

Davyt63, been in touch with Maskells, job sorted thankyou. When i mentioned heiwrauch 100 they knew straight away what i wanted, spot on mate , cheers

 

 

cheers thanks for the info Davy63, i will tell the guy in the shop he is talking crap

atb

 

 

thats what we are here for lads! to help one another!

regards

 

davy