Jump to content

A couple of fenns out.


Recommended Posts

Went to the farm yesterday to set a few fenns.Went to a warren where i saw a couple of rabbits drop into,went to set the fenns but the ground was like concrete and most of the holes where in amongest the undergrowth,so out of the 10 traps i had with me i set 5,i was not going to bother but i thought well i am here now.

Went back this morning to check,i had a rabbit in one and just the front half of a rabbit in another,bloody fox :censored::wallbash: thank god i use earth anchors or the trap would have gone.

 

001-15.jpg

002-16.jpg

 

Also landed some new permision today i will put a post up in the ferreting section.

Link to post

Went to the farm yesterday to set a few fenns.Went to a warren where i saw a couple of rabbits drop into,went to set the fenns but the ground was like concrete and most of the holes where in amongest the undergrowth,so out of the 10 traps i had with me i set 5,i was not going to bother but i thought well i am here now.

Went back this morning to check,i had a rabbit in one and just the front half of a rabbit in another,bloody fox :censored::wallbash: thank god i use earth anchors or the trap would have gone.

 

001-15.jpg

002-16.jpg

 

Also landed some new permision today i will put a post up in the ferreting section.

them traps look nice TP,i,am setting a few in the morning in some big sand sets , its the only place near me where you can get a peg in the ground,tried to set a few snares yesterday ,you could,nt get the peg ,or the tealer into the ground,could do with a weeks rain ,followed by a couple of good frosts

Link to post

them traps look nice TP,i,am setting a few in the morning in some big sand sets , its the only place near me where you can get a peg in the ground,tried to set a few snares yesterday ,you could,nt get the peg ,or the tealer into the ground,could do with a weeks rain ,followed by a couple of good frosts

 

Just sprayed them with black paint,stops them rusting while be in set in wet ground. ;)

I know what you mean about the ground,like iron round here could do with a drop of rain or two.

Link to post
what type of earth anchor do you use in that hard soil and how deep do you have to get them? good trapping

 

These are the ones i use,once in the ground they have to be dug out as you can not pull them out.

I use this type on my fenns and bodygrips.All you have to do to fix them to the trap is get some 2.5mm wire and make like the thing you find on a keyring then just thread on to the ring of the trap ;) .

 

001-16.jpg

002-17.jpg

003-17.jpg

 

Hammered into the ground say 7-8 inches they will not come out,then when you have finished trapping that hole just put them to the side for when you need them again,they will never rust and are there for ever. ;)

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...