jam1 8 Posted September 20, 2009 Report Share Posted September 20, 2009 hello there ive got a airarms s200, whent for a walk this morning whent to shoot it an it made a clickin noise then hissed as if the gas was cumin out, pellet now stuck i dont no that much about guns! [bANNED TEXT] could have happend Quote Link to post
Marksman 934 Posted September 21, 2009 Report Share Posted September 21, 2009 Could be a number of things mate. But firstly I'd be looking at the seals or transfer port.... Presuming it is charged Unless you're competent at working on your own rifle I'd suggest you took it to a gunsmith for a service. Hopefully it's something simple for you mate Quote Link to post
donnyc 1,203 Posted September 21, 2009 Report Share Posted September 21, 2009 Probably got low on air and vented Quote Link to post
Malt 379 Posted September 21, 2009 Report Share Posted September 21, 2009 Probably got low on air and vented Sounds about right. You can remove the pellet with a cleaning rod. Open the breech and knock it out by putting the rod down the barrel. If you are unsure, or don't have a cleaning rod, then take the gun to a gunsmiths, it only takes seconds. : thumbs: Quote Link to post
SEAN3513 7 Posted September 21, 2009 Report Share Posted September 21, 2009 yes definately f****d !!!!! so....i'll give you a tenner for it ??? seriously though it does sound as though its vented , or a seal has gone it will cost you around 40-50 quid to have a service. cheers sean Quote Link to post
strebblo 0 Posted September 23, 2009 Report Share Posted September 23, 2009 Don't panic dude - my S200 used to do that when the pressure got too low. The simplest thing to do is just refill it with air (hold the bolt open to stop it venting out as you fill) and then fire in a safe direction - obviously don't put any pellet in, you just want to eject the one in the barrel. You must have run it for quite a few shots - the pellets must have been falling out of the barrel?! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.