Harvey1972 0 Posted September 19, 2009 Report Share Posted September 19, 2009 S410's have a MAX SAFE WORKING pressure of 190bar, ANYTHING over this and you run a serious risk of deforming or even worse, popping the air chamber and that will be a very expensive lesson quickly learnt. Also the internals are not made to withstand any higher pressures so you will also be causeing stresses that shouldn't be there. Trust me, by filling over 190 (better still 180) you gain nothing. Quote Link to post
Catcher 1 639 Posted September 19, 2009 Author Report Share Posted September 19, 2009 S410's have a MAX SAFE WORKING pressure of 190bar, ANYTHING over this and you run a serious risk of deforming or even worse, popping the air chamber and that will be a very expensive lesson quickly learnt. Also the internals are not made to withstand any higher pressures so you will also be causeing stresses that shouldn't be there.Trust me, by filling over 190 (better still 180) you gain nothing. It,s the S510 Harvey.But you could be right.Think my best bet is to phone Air Arms.Cheers Catcher Quote Link to post
Harvey1972 0 Posted September 19, 2009 Report Share Posted September 19, 2009 Same thing mate, Did you get a manual with the rifle as all will be explained in there. Quote Link to post
Catcher 1 639 Posted September 19, 2009 Author Report Share Posted September 19, 2009 Same thing mate, Did you get a manual with the rifle as all will be explained in there. Yes mate.It did say not to let it drop below 100 bar. but nothing about over fill Cheers Catcher Quote Link to post
Catcher 1 639 Posted September 19, 2009 Author Report Share Posted September 19, 2009 Hi thank,s for all you feedback.I will take the advice given and stick to 180 bar atb. Catcher Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.