Handy bit of kit !!!

[ferretville 69]

Right chaps not sure if this has been done or shown on here before ,or some of you may allready have it and use it. Adapter part for your quick fill on the stirrup pump . See the problem i had was i had two different guns a s410 and a hw100 nice problem though . The stirrup pump had the 410 quick fill on and what i did`nt want was to be unscrewing that off to put the hw100 quickfill on when that needed pumped up and vice versa everytime one of the guns needed filled. Threads go on them when then constantly unscrtewed all the time plus its just a bloody hassle .

So solution to my problem was what my mate brought round for me he had seen them on the internet and with him having two guns he had the same problem. Heres a few pics just to show you what im on about

 

the main adapter part that screws on the stirrup pump end . The top of it pulls down slightly allowing the snap on to slide in and lock in place.

 

the 410 and hw1oo quickfills

 

410 quickfill sitting in place ready to go

 

the hw100 quickfill on

 

The two snap on and off in seconds so you can fill both guns in literally 5 minutes no unscrewing no hassle at all. Yes i could of getting a divers bottle and done it that way but that would of ment shelling out alot more than the 12 quid it cost me for the adapter. Just thought i would share this with the members who may have two or three guns this is a brilliant piece of kit . Like i say this may have been done before or some of you`s may allready have it but if not and you have been facing the same problem this is a handy bit of kit . YIS FV

[davyt63 1,845]

Right chaps not sure if this has been done or shown on here before ,or some of you may allready have it and use it. Adapter part for your quick fill on the stirrup pump . See the problem i had was i had two different guns a s410 and a hw100 nice problem though . The stirrup pump had the 410 quick fill on and what i did`nt want was to be unscrewing that off to put the hw100 quickfill on when that needed pumped up and vice versa everytime one of the guns needed filled. Threads go on them when then constantly unscrtewed all the time plus its just a bloody hassle .

So solution to my problem was what my mate brought round for me he had seen them on the internet and with him having two guns he had the same problem. Heres a few pics just to show you what im on about

 

the main adapter part that screws on the stirrup pump end . The top of it pulls down slightly allowing the snap on to slide in and lock in place.

 

the 410 and hw1oo quickfills

 

410 quickfill sitting in place ready to go

 

the hw100 quickfill on

 

The two snap on and off in seconds so you can fill both guns in literally 5 minutes no unscrewing no hassle at all. Yes i could of getting a divers bottle and done it that way but that would of ment shelling out alot more than the 12 quid it cost me for the adapter. Just thought i would share this with the members who may have two or three guns this is a brilliant piece of kit . Like i say this may have been done before or some of you`s may allready have it but if not and you have been facing the same problem this is a handy bit of kit . YIS FV

 

 

nice one FV

i have seen these before recently.are they from bestfitting? i was looking for like a y piece for the hose then shut one of while i fill the other but havent came across it yet?

regards

 

davy

[maty j 6]

I'm using the same FV and there great. Saves messing around with spanners.

[ferretville 69]

nice one FV

i have seen these before recently.are they from bestfitting? i was looking for like a y piece for the hose then shut one of while i fill the other but havent came across it yet?

regards

 

davy

Not sure were my mate got it from davy but can ask him if your interested .

 

 

I'm using the same FV and there great. Saves messing around with spanners.

maty there brilliant cheers FV