HW35 barrel doesn't lock into place properly

[zeb 0]

My problem is that when i close the barrel (brack barrel) it donst always click into place if u know what i mean, it will come back open just a little, enough to blow the breach seal out a bit and fire the pellet but the barrel is pointing towards the ground, i hope this makes scene any ideas whats going on here ?

 

if i close it a bit harder it will lock in but not always

[SEAN3513 7]

worn trigger sears.......i would think

 

try www.gunspares.co.uk

 

atb

 

sean

[zeb 0]

umm im a noob to air rifle matence so what is this part ?

 

and this is the spares page with a diagram of the gun

http://www.gunspares.co.uk/shopdisplayproducts.asp?page=2

[Phantom 631]

worn trigger sears.......i would think

 

try www.gunspares.co.uk

 

atb

 

sean

 

Hi Sean,

No offence, but I think you didn't read the op correctly.

The breach lock is at fault buddy not the trigger sears.

If its not locking up straight and the barrel is drooping, its defo the breach lock. May be worn or perhaps a new spring fitted will solve the problem.

 

Phantom

[zeb 0]

ah right that would make more sense so what part am i looking for the spring that fits into the latch so CS190 on diagram ? or the latch itslef ? EC010

 

http://www.gunspares.co.uk/showcatimage.asp?id=24562

[SEAN3513 7]

ooops !!!!!!!

 

yes, i read it as the gun was "self" firing when the barrel was closed !!!!

 

thanks a lot

 

sean

[Hazmat 0]

had this fault myself, barrel locking pin spring was broken.