dexie 2 Posted August 17, 2009 Report Share Posted August 17, 2009 hi...just wondering if anyone may know [bANNED TEXT] is wrong with it cause it starts but wont rev just ticking over.?? it a briggs & stratton engine any help would be a help.....cheers Quote Link to post Share on other sites
martyn789 0 Posted August 17, 2009 Report Share Posted August 17, 2009 hi...just wondering if anyone may know [bANNED TEXT] is wrong with it cause it starts but wont rev just ticking over.?? it a briggs & stratton engine any help would be a help.....cheers has the cabal snapped from the throttle Quote Link to post Share on other sites
moter poacher 2 Posted August 17, 2009 Report Share Posted August 17, 2009 (edited) check the cable for a break,or if not theres a like throtle bar thing at the front right hand side there should be a screw there to turn the revs up and you could use it like that,or shorten the little spring that revs the engine Edited August 17, 2009 by moter poacher Quote Link to post Share on other sites
owdnorthener 13 Posted August 17, 2009 Report Share Posted August 17, 2009 If the throttle cable isnt broken, check the linkage...... at both ends ... it sometimes just slips off. ATB Quote Link to post Share on other sites
tullfan 0 Posted August 20, 2009 Report Share Posted August 20, 2009 if its not the cable check the float chamber on the bottom of the carb for crap also take the air filter out and give it a good clean they often get clogged up with grass cuttings Quote Link to post Share on other sites
Terrier man 38 Posted August 20, 2009 Report Share Posted August 20, 2009 Follow the cable down to where it meets the block it should be pulling on the throttle if its not pulling it then its your cable if it is and its still just thinking over its somthing to do with the carb. And you will have to strip it down Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.