LAMPING

[Guest mike222]

HAVE JUST BOUGHT LOGUN GUN LAMP 100% ILLUMINATION I CAN WALK TO WITHIN 5 yds OF CONIES USING IT AS A TORCH, I LOOK THROUGH SCOPE THEN NOTHING, JUST A GREY EFFECT NO IMAGE AT ALL JUST THE RECTICLE IN THE SCOPE, ANY IDEA'S ? thank's to everyone for your suggestions,problem sorted it was the shroud on front sight reflecting back,5min's with a junior hacksaw problem rectified, thank's all again

Edited August 3, 2006 by mike222

[Guest RobW71]

Is it set forward(infront) of the scope lense?

 

Regards Rob

[Guest mike222]

Is it set forward(infront) of the scope lense?

 

Regards Rob no it's roughly 1.5 inches behind scope lense, many thanks for your prompt reply

[Ricky-N.p.p 0]

Try ajusting the possitioning on the scope before you "fix" it mate

[blando 0]

get a lurcher :11:

[Guest whippet]

Put the lamp towards the back of the scope, it should help quite a bit.

[Guest RobW71]

That's why it's blurring whippet, it needs to be beyond the front lense. A lampman doesn't stand behind you

 

Regards Rob

[dead ive 0]

HAVE JUST BOUGHT LOGUN GUN LAMP 100% ILLUMINATION I CAN WALK TO WITHIN 5 yds OF CONIES USING IT AS A TORCH, I LOOK THROUGH SCOPE THEN NOTHING, JUST A GREY EFFECT NO IMAGE AT ALL JUST THE RECTICLE IN THE SCOPE, ANY IDEA'S ?

Take yer lens cap off

 

On another note .........I've been doing this for years and if you can get within 5yds of a rabbit ditch the rifle and use a house brick :whistle:

 

It's called scope Glare ..........or unwelcome light being transmitted into the lens as i call it .......generally from behind .........Moderator glare is another issue and that comes from the front or light reflected back in off a large T8 for example .

Edited August 3, 2006 by dead ive