help please!

[cunninghamb 2]

hello all,

 

i was wiping down my aa s400 and rembered that my mates saftey catch had fallen out and his gun is now up in england getting sorted, but i was looking at it thinking how the hell did he do that? so i put the saftey on and gave it an extra shuv - just to see what happend and it fell out!

 

the slider bit came out and the little ball bearing came out, and then the spring came out, so my quistion is, is there a DIY way of fixing it without invalding my warrenty,

 

this is bloody typical i've had no pellets for the last month, i got pellets yeasterday got it scoped and this happend today

 

thanks all,

 

any help much appreciated,

 

all the best

[davyt63 1,845]

hello all,

 

i was wiping down my aa s400 and rembered that my mates saftey catch had fallen out and his gun is now up in england getting sorted, but i was looking at it thinking how the hell did he do that? so i put the saftey on and gave it an extra shuv - just to see what happend and it fell out!

 

the slider bit came out and the little ball bearing came out, and then the spring came out, so my quistion is, is there a DIY way of fixing it without invalding my warrenty,

 

this is bloody typical i've had no pellets for the last month, i got pellets yeasterday got it scoped and this happend today

 

thanks all,

 

any help much appreciated,

 

all the best

this happend to me a while back,you need to put the small grub screw back in if you can find it ?

[cunninghamb 2]

this happend to me a while back,you need to put the small grub screw back in if you can find it ?

 

does this just fall out or screw in and out, also will this affect the warrenty, and do i need to take the trigger gaurd off to get at the grub screw, i know what bit you mean just how to get the allen key in there

 

god i am making this hard

 

 

thanks davy

[Catcher 1 639]

Demand a new gun.That is shocking atb Catcher1

[cunninghamb 2]

Demand a new gun.That is shocking atb Catcher1

 

gun is just out of warrenty - by a month

 

 

apperntly its a common fault, probely a design fault

[Catcher 1 639]

Demand a new gun.That is shocking atb Catcher1

 

gun is just out of warrenty - by a month

 

 

apperntly its a common fault, probely a design fault

 

Hi A LOT OF THING,S MAY GO WRONG WITH A GUN.A DESIGN FAULT IN THE SAEFTY CATCH THAT,S A NO NO.I WOULDENT SIT BACK AND TAKE IT ATB CATCHER 1

[cunninghamb 2]

Hi A LOT OF THING'S MAY GO WRONG WITH A GUN.A DESIGN FAULT IN THE SAEFTY CATCH THAT'S A NO NO.I WOULDENT SIT BACK AND TAKE IT ATB CATCHER 1

 

indeed but what major air rifle manufacturar is going to listen to a 16 year old ?!?

 

anyway

 

could someone please help with my orginal quistion

 

all the best

 

cheers lads

 

edidted because i said 26 year old instead of 16 year old :oops:

Edited August 1, 2009 by cunninghamb

[davyt63 1,845]

this happend to me a while back,you need to put the small grub screw back in if you can find it ?

 

does this just fall out or screw in and out, also will this affect the warrenty, and do i need to take the trigger gaurd off to get at the grub screw, i know what bit you mean just how to get the allen key in there

 

god i am making this hard

 

 

thanks davy

 

yes buddy take the stock off, then take the trigger guard {only} off, and you will be able to get to it.

put the catch back in, followed by the ball barring, then the spring ,then the grub screw.then tighten & adjust to your liking

hope this helps

 

regards

 

davy

[cunninghamb 2]

yes buddy take the stock off, then take the trigger guard {only} off, and you will be able to get to it.

put the catch back in, followed by the ball barring, then the spring ,then the grub screw.then tighten & adjust to your liking

hope this helps

 

regards

 

davy

 

thanks very much mate!

 

if all goes wrong im blaming you

 

have you got a number that i could give you a bell on if i run into trouble, pm me if you want to give it to me, sounds queer

 

cheers

[davyt63 1,845]

yes buddy take the stock off, then take the trigger guard {only} off, and you will be able to get to it.

put the catch back in, followed by the ball barring, then the spring ,then the grub screw.then tighten & adjust to your liking

hope this helps

 

regards

 

davy

 

thanks very much mate!

 

if all goes wrong im blaming you

 

have you got a number that i could give you a bell on if i run into trouble, pm me if you want to give it to me, sounds queer

 

cheers

 

if i give you my number? can i invite you to moonlight valley!!!

[Catcher 1 639]

this happend to me a while back,you need to put the small grub screw back in if you can find it ?

 

does this just fall out or screw in and out, also will this affect the warrenty, and do i need to take the trigger gaurd off to get at the grub screw, i know what bit you mean just how to get the allen key in there

 

god i am making this hard

 

 

thanks davy

 

yes buddy take the stock off, then take the trigger guard {only} off, and you will be able to get to it.

put the catch back in, followed by the ball barring, then the spring ,then the grub screw.then tighten & adjust to your liking

hope this helps

 

regards

 

davy

 

 

Good advice mate.What if it happen,s again and some one is in front of the gun.atb. Catcher 1

[cunninghamb 2]

What if it happen,s again and some one is in front of the gun.atb. Catcher 1

 

i wouldnt be taking the saftey off if someone was standing infront of the gun, more to the point the loaded gun wouldnt be pointing at anyone lol,

 

i will send air arms and email and see what they say, i will post my email to them and then thier reply,

 

all the best

[davyt63 1,845]

this happend to me a while back,you need to put the small grub screw back in if you can find it ?

 

does this just fall out or screw in and out, also will this affect the warrenty, and do i need to take the trigger gaurd off to get at the grub screw, i know what bit you mean just how to get the allen key in there

 

god i am making this hard

 

 

thanks davy

 

yes buddy take the stock off, then take the trigger guard {only} off, and you will be able to get to it.

put the catch back in, followed by the ball barring, then the spring ,then the grub screw.then tighten & adjust to your liking

hope this helps

 

regards

 

davy

 

 

Good advice mate.What if it happen,s again and some one is in front of the gun.atb. Catcher 1

hi Catcher 1

ita a simple fix any one could do this,and if you are being sarcastic! in your comment & with the quote that follows.then the only thing that should be in front of anyone's rifle should be the quarry/paper target,sky,floor. depending on which way you carry? your rifle

 

regards

 

davy

[Catcher 1 639]

this happend to me a while back,you need to put the small grub screw back in if you can find it ?

 

does this just fall out or screw in and out, also will this affect the warrenty, and do i need to take the trigger gaurd off to get at the grub screw, i know what bit you mean just how to get the allen key in there

 

god i am making this hard

 

 

thanks davy

 

yes buddy take the stock off, then take the trigger guard {only} off, and you will be able to get to it.

put the catch back in, followed by the ball barring, then the spring ,then the grub screw.then tighten & adjust to your liking

hope this helps

 

regards

 

davy

 

 

Good advice mate.What if it happen,s again and some one is in front of the gun.atb. Catcher 1

hi Catcher 1

ita a simple fix any one could do this,and if you are being sarcastic! in your comment & with the quote that follows.then the only thing that should be in front of anyone's rifle should be the quarry/paper target,sky,floor. depending on which way you carry? your rifle

 

regards

 

davy

 

 

Hi mate me and you know that.You take three of four youngsters.Who have just got there first gun .Same story mate Not a chanch.atb. Catcher 1

[cunninghamb 2]

got it sorted today, took not even 10 minutes

 

the bloody annoning thing is that i took the scope, silincer, sling off, so now i need to zero again i just cant be arsed lol

 

 

thanks very much for all your help davy,

 

all the best