jhon d 0 Posted July 17, 2009 Report Share Posted July 17, 2009 hi has any one used this combination and if so what was the best load. regards Jhon D : Quote Link to post
Spangle 0 Posted July 17, 2009 Report Share Posted July 17, 2009 I haven't used that combination but in my .243 I use 41gr Varget, cci br2 primer and a 68gr berger match grade. It's awsome! Quote Link to post
riohog 5,712 Posted July 17, 2009 Report Share Posted July 17, 2009 hi has any one used this combination and if so what was the best load. regards Jhon D : 43gns of 414 no problem mate very accurate you can load up to 45gns Quote Link to post
jhon d 0 Posted July 17, 2009 Author Report Share Posted July 17, 2009 hi has any one used this combination and if so what was the best load. regards Jhon D : 43gns of 414 no problem mate very accurate you can load up to 45gns thanks will give it a try jhon d Quote Link to post
SNAP SHOT 194 Posted July 18, 2009 Report Share Posted July 18, 2009 i went for a little shot today and achieved this.... using the 87g v-max.............. 5 shot group outside to outside...... and finally center to center......... And yes it's under 1/4 MOA........ ATB. Snap. Quote Link to post
provarmint 25 Posted July 19, 2009 Report Share Posted July 19, 2009 Stunning Snap Quote Link to post
jhon d 0 Posted July 24, 2009 Author Report Share Posted July 24, 2009 i went for a little shot today and achieved this.... using the 87g v-max.............. 5 shot group outside to outside...... and finally center to center......... And yes it's under 1/4 MOA........ ATB. Snap. nice Quote Link to post
weejohn 3 Posted July 24, 2009 Report Share Posted July 24, 2009 tell us more snap , powder, primer,seating depth, velocity, case trim length Quote Link to post
jhon d 0 Posted July 29, 2009 Author Report Share Posted July 29, 2009 i went for a little shot today and achieved this.... using the 87g v-max.............. 5 shot group outside to outside...... and finally center to center......... And yes it's under 1/4 MOA........ ATB. Snap. nice whats your set up snap ? mine is ruger 77 mk2 heavy barrel and am still trying to sort out loads.? jhon d Quote Link to post
sheepworrier 1 Posted July 30, 2009 Report Share Posted July 30, 2009 I'm trying out the same load type at the moment it's not a bad setup at all . While we're on the subject, where's the best re-loading equipment suppliers in wales or near. Cheers Dave Quote Link to post
mattydski 560 Posted July 30, 2009 Report Share Posted July 30, 2009 I'm trying out the same load type at the moment it's not a bad setup at all . While we're on the subject, where's the best re-loading equipment suppliers in wales or near. Cheers Dave Have you tried Sportsmans Gun Centre, they do a good mail order service if you know what your looking for? Quote Link to post
jhon d 0 Posted July 30, 2009 Author Report Share Posted July 30, 2009 I'm trying out the same load type at the moment it's not a bad setup at all . While we're on the subject, where's the best re-loading equipment suppliers in wales or near. Cheers Dave Have you tried Sportsmans Gun Centre, they do a good mail order service if you know what your looking for? mate i got mine off a mate who was giving up sorry do not know jhon d Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.