Paddywoodcock 0 Posted July 1, 2009 Report Share Posted July 1, 2009 Hi all, I have almost made the decision to buy a Remington 700 CDL left handed in caliber .243 Just seen the rifle today, it's a beauty! Action is smooth, almost as smooth as a Tikka. The stock is nice, only its price is a killer but a negociation will take place. I have a scope Swaro 6-18X50 ready for the rifle and I need your help to get it mounted as low as possible. I found the correct base from Leupold QRW (ref 49841) but I than have no idea if I should choose the low, medium or high rings to fit with this pretty big scope. I don't want to have more than a couple of mm in between the scope and the barrel. I hope some of you can help Thanks Quote Link to post
Mr_Logic 5 Posted July 2, 2009 Report Share Posted July 2, 2009 Medium or high, likely high but every now and then you get away with medium... Quote Link to post
oxo 457 Posted July 2, 2009 Report Share Posted July 2, 2009 Medium or high, likely high but every now and then you get away with medium... This might help http://www.burrisoptics.com/mountchart1.html I have a set of high Burris Zee Rings on my Howa with a 4/16x50 mamba, only a couple of mil clearance. Quote Link to post
Paddywoodcock 0 Posted July 2, 2009 Author Report Share Posted July 2, 2009 Medium or high, likely high but every now and then you get away with medium... This might help http://www.burrisoptics.com/mountchart1.html I have a set of high Burris Zee Rings on my Howa with a 4/16x50 mamba, only a couple of mil clearance. thanks Oxo, much appreciated! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.