cleaning the t8

[smithy46 0]

can any 1 tell me how to clean the t8 sound moderator i bought 2nd hand

[Mr_Logic 5]

You can't, they're a sealed unit.

[landrover 6]

spray napier cun gleaner into it, then blow out with a airline. that's all i do

[lgray88 4]

i clean mine with abit of 3in1 oil, but ive only had it a matter of months and the muzzle end of the moderator is rotting already so god knows what its like inside. i dont know if it would be worth while given it a run in a ultra sonic cleaner then throughly dried out.

 

liam

[coldweld 65]

Liam send it back ! You will get a new one .

 

Smithy Why do you think it need cleaning ? I only spray mine with WD40 about once a year, and then very lightly .

It is used every sat night rain or dry just leave out to air when i get in and put away in the morning

[martin 332]

I used to spray with WD40,but,it sent the zero all over the place,so now I just take it off when I get in and put it on top of the boiler for it to completely dry out.............Martin.

[rob reynolds uk 3]

Liam send it back ! You will get a new one .

 

will they give you a new one if it has a small hole in the end ???

[hiluxmk3 1]

can any 1 tell me how to clean the t8 sound moderator i bought 2nd hand

REFLEX recomen to clean with WD40, i do this and have had no problems, pm me your email address and i will scan and forward you the instruction manual for it.

[Deker 3,478]

I understand there is some SONIC cleaning method...don't ask..I'm an old boy who doesn't understand new technology!

[mole trapper 1,693]

T8,S ARE GREAT SOUND MODDIES BUT THEY ARE SHITE AS FAR AS LONGGEVITY IS CONCERNED !. Had 2 now, the first only had a few months and a hole appeared through the outer casing, Jackson refused to accept there was a problem, instead saying i had abused it, b......s, everytime i took it out the cabinet "next to the aga" even if i did not fire a round, it was placed on aga then WD40,d. Would NEVER buy another one, PES all the way from now on.

[midnight sun 0]

can any 1 tell me how to clean the t8 sound moderator i bought 2nd hand

I also bought a 2nd hand t8,every time i have been out and taken a shot i take the t8 off the gun, at the end of a box of bullets i give the t8 a light squirt of WD4O i have had no problems yet.

[rioulike 2]

can any 1 tell me how to clean the t8 sound moderator i bought 2nd hand

I also bought a 2nd hand t8,every time i have been out and taken a shot i take the t8 off the gun, at the end of a box of bullets i give the t8 a light squirt of WD4O i have had no problems yet.

i do much the same but if its been out in the rain it gets a squirt aswell no problems also

[heritage 202]

wd40 is fine if used sparingly,apparently it has an anti rust component that will strip the finish after a while, the ultra sound means is the one i use. its exactly the same kit that tattoist use to clean there equipment. like a baymarie full of a cleaning fluid,pop the mod in and immerse,turn on and the pulses generated clean the insine/outside gently. remove-dry- light lubrication and back on.i was told theres no need for cleaning sealed moderators but decided to do it anyway,surely the effects of a dirty barrel would apply to a dirty mod??

[Alycidon 2]

Had my T8 since 2003, have got rust bubbles appearing around the outlet hole. It gets a sqirt with aerosol gun cleaner or WD40 most times but not blown out. Fired maybe 700-800 rounds though it. Wont be having another.

 

A