Prefered size of a T BAR?

[Guest TERRIERCENTRAL]

As Above

 

size whitch you prefer and reason why this is ? thanks T.C

[smithwicks 182]

about 3 and a half feet- easy to hide from the anties.

[Bigshrimp 5]

4 foot and sharp!

easy to stab them!

[Shamo 319]

3ft long, 20mm gauge and a wedge shape at the tip, made of stainless steel.......just like my Brother makes!...lol. 3ft long to be able to use it in a hole/in tight if needs be, short enough to put across back of Quad, stainless for obvious reasons, 20mm so not too heavy to carry.

[Nino (Italy) 13]

 

 

 

5 foot, 15 mm.

[scent 509]

3.5 foot long 10mil diameter galvanised steel with a sharpish head not too sharp though

[Hepher 86]

3 1/2FT STAINLESS, 99% OF DIGS ARE AROUND THE 1METER DEPTH SO A SPIT THAT LONG IS IDEAL, SLIGHT SHARPENING ON THE TIP JUST FOR EASE OF THE BARR GOING THROUGH THE EARTH. I KKNOW WITH THE ADVANCEMENT OF NEW LOCATING EQUIPMENT THERE ARE LADS NOT USING SPIT BARS ANYMORE, I FIND THEM INVALUABLE FOR A FEW REASONS, I LIKE TO HEAR WHAT'S GOIN ON BENEATH THE SOD AND IN TIGHT SPACES THEY ARE GOOD FOR LETTING A LITTLE AIR IN FOR THE DOG.

Edited June 16, 2009 by Hepher

[corkie 14]

3 1/2FT STAINLESS, 99% OF DIGS ARE AROUND THE 1METER DEPTH SO A SPIT THAT LONG IS IDEAL, SLIGHT SHARPENING ON THE TIP JUST FOR EASE OF THE BARR GOING THROUGH THE EARTH. I KKNOW WITH THE ADVANCEMENT OF NEW LOCATING EQUIPMENT THERE ARE LADS NOT USING SPIT BARS ANYMORE, I FIND THEM INVALUABLE FOR A FEW REASONS, I LIKE TO HEAR WHAT'S GOIN ON BENEATH THE SOD AND IN TIGHT SPACES THEY ARE GOOD FOR LETTING A LITTLE AIR IN FOR THE DOG.

 

what burrows u diggin bud id love i mtr reg no such luck :showoff:

Edited June 16, 2009 by corkie

[Hepher 86]

3 1/2FT STAINLESS, 99% OF DIGS ARE AROUND THE 1METER DEPTH SO A SPIT THAT LONG IS IDEAL, SLIGHT SHARPENING ON THE TIP JUST FOR EASE OF THE BARR GOING THROUGH THE EARTH. I KKNOW WITH THE ADVANCEMENT OF NEW LOCATING EQUIPMENT THERE ARE LADS NOT USING SPIT BARS ANYMORE, I FIND THEM INVALUABLE FOR A FEW REASONS, I LIKE TO HEAR WHAT'S GOIN ON BENEATH THE SOD AND IN TIGHT SPACES THEY ARE GOOD FOR LETTING A LITTLE AIR IN FOR THE DOG.

 

what burrows u diggin bud id love i mtr reg no such luck :showoff:

 

AW YOU MUST BE 1 OF THEM SUPER DIGGERS ONY DOES 10-15 FT ONES. YEAH YOU GO FOR IT! YOUR FOXES LIKE EM DEEP. STICK TIL YOUR SHOWS YA PONY

Edited June 17, 2009 by Hepher

[dev 226]

my mate has one 1.3m long, 25mm stainless steel is the best one ive used, mine is 3ft or so,20mm

[Guest lampingwithmurt]

6FT GALAVINISED AND SHARP

[Guest reload]

6FT GALAVINISED AND SHARP

 

 

A 6ft long bar... :clapper: what yer doing with that scaffolding... ...f**k about

Edited June 17, 2009 by reload

[breffni 3]

6FT GALAVINISED AND SHARP

Would the fuuucker not bend on ya?

Mine is 4 foot 20mm stainless,might cut it to 3.5.

[Northsider 9]

mines 5 inches 40mil thick doses the trick :kiss:

[burrowman 6]

3.5 foot long 10mil diameter galvanised steel with a sharpish head not too sharp though

Jeez Scent how do you stop a 10mm bar from bending or does galvanising give it strenght. Best one i found is 3 foot of 15mm spring steel, it wont bend.