CUPCAKE118 0 Posted June 13, 2009 Report Share Posted June 13, 2009 Have noticed the other day that the barrel moves when i put the silencer on! Is this normal? because i think it isn't!!! have part stripped and rebuilt to have a look but i am a little stumped, when you remove the fore grip it looks like the bolt holds the barrel into place but does not have a location like you would expect for a retaining bolt. how do you fully remove the barrel as couldn't remove it fully because the breach and pin are connected with the mag mechanism? would be able to sus it out but thought that someone may have already done it and might be able to help! many thanks Tony Quote Link to post
Guest buster321c Posted June 13, 2009 Report Share Posted June 13, 2009 http://www.gunspares.co.uk/ Have a good look round this site mate , some good info on there Quote Link to post
CUPCAKE118 0 Posted June 13, 2009 Author Report Share Posted June 13, 2009 http://www.gunspares.co.uk/ Have a good look round this site mate , some good info on there had a little look but not much Logun stuff! cheers its a good site to know Quote Link to post
SEAN3513 7 Posted June 13, 2009 Report Share Posted June 13, 2009 phone webley technical or visit there web site...they are logun....and very very helpful. good luck sean Quote Link to post
stealthy1 3,964 Posted June 13, 2009 Report Share Posted June 13, 2009 Get a HW100T, Problem solved. Quote Link to post
Billsno1 0 Posted March 14, 2010 Report Share Posted March 14, 2010 Have noticed the other day that the barrel moves when i put the silencer on! Is this normal? because i think it isn't!!! have part stripped and rebuilt to have a look but i am a little stumped, when you remove the fore grip it looks like the bolt holds the barrel into place but does not have a location like you would expect for a retaining bolt. how do you fully remove the barrel as couldn't remove it fully because the breach and pin are connected with the mag mechanism? would be able to sus it out but thought that someone may have already done it and might be able to help! many thanks Tony For an s16s you have to remove the shroud, the fore-grip and the scope rail as they both retain the barrel. Once removed, the barrel can be pulled carefully. For an s16 i believe it is 2 screws at base of barrel and fore-grip, then pull barrel forwared. I think the manual supplied covers this mate Bill Quote Link to post
terrier410 53 Posted March 14, 2010 Report Share Posted March 14, 2010 there`s a great break down video on you tube Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.