Cumbrian 7 Posted June 4, 2009 Report Share Posted June 4, 2009 (edited) Hi all , I have just bought a MTC Viper 6-24x56 for my cz452 but as it is 2nd hand I have no instructions etc so could someone advise me on the extras I have zeroed the gun , but what are the numbers on the turrets for and the thumb wheel for , sorry for sounding dumb Edited June 5, 2009 by Cumbrian Quote Link to post
lgray88 4 Posted June 4, 2009 Report Share Posted June 4, 2009 sportmatch mounts make a reach forward mount that increase the eye relief by a inch i think. and you could also add butt spacers to move the gun further away. liam Quote Link to post
dicehorn 38 Posted June 5, 2009 Report Share Posted June 5, 2009 Have a look at this web page and there you can download the manual - the big wheel fits over the parallax small wheel to give you quicker focusing http://www.mtcoptics.co.uk/Viper_main.htm Quote Link to post
lgray88 4 Posted June 7, 2009 Report Share Posted June 7, 2009 as stated the wheel slides over the paralx adjustment to aid in focusing, the numbers on the turrets state 1 moa you will notice 8 segement within each moa as this scope dials in 1/8 clicks. when your gun is zeroed theres a thin knurled ring on each turret unscrew each one and you can twist these numbers around so the zero matches up with the small notch on the scope tube , you can then dial in extended ranges say for 5.5 moa go up 1,2,3,4,5 then 4 clicks for the half a moa. then when you want to dial back to your zero you jsut counter rotate your turret back too the "0" number. liam Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.