243

[shottyscotty 3]

if i was to zeroe my 243 at 150 metres and then was to shoot targets at 300 metres how much bullet drop would i get roughly as i dont have much experiance of 243 and what kind of range does everyone get out of there bullet before it drops ie stays flat to what distance. what i mean is with my 17hmr i dont have to give hold over between 30 meters and 110 because the bullet stays flat until then

Edited May 15, 2009 by shottyscotty

[the Verminator 0]

http://www.hawkeoptics.com/?gclid=CPeFgO7OvpoCFYKB3godbz2Wrg

 

download both programs at the bottom of the screen, hawke BRC & chairgun pro. very handy programs for what you want to know.

[lgray88 4]

what is the weight of the bullet and is a reloaded or a factory load , if its a factory load tell me the make and ill check and see what exbal says

 

liam

[shottyscotty 3]

the bullet is factory rws 100 gr

[lgray88 4]

exbal doesnt have any preloaded factory loads for rws but i have a winchester 100 grain power point, with a muzzle velocity of 2960fps and a sight in distance of 100 yards the drop of the bullet will be at 2.8inches at 200 yards, 12.4 inches at 300 yards,28.6 inches at 400 yards

 

liam

[lgray88 4]

shit sorry mate, never realsied the 150 metre zero i shal do it again, 200 metres- 6.4cm , 300 metres-33.5cm 400 metres-83.5cm sorry that the value are in the metric system its jsut the way exbal works you have choice of metres and cm or yards and inches

 

liam

Edited May 17, 2009 by lgray88

[Alycidon 2]

Here is what I regard as the best proramme around on external ballistics. get your ballistic co efficient from your bullet manufacturers web site and away you go,

 

http://www.biggameinfo.com/index.aspx?page=%2fbalcalc.ascx

 

A

[scarecrow243 24]

Hi RWS gives the m.r.d on the inside lid of the box ie 100grn,soft point 243 manufacturers recomended distance to zero is 213 yards it also gives how mutch drop you will get at further ranges,