atlanta1000

Geoff.223, Yes. Once I placed the rubber washer where it should be it is cycling every thing I have put through it inc 24g 7.5 65mm 28g 7.5 and 8 67mm and 34g 9ball SG's 70mm. So far I h ave used RC and Gamebore cartridges in it with out problem. I am told it is better to use the 70mm and 76mm cartridges in them but I have had no problem with the others.

Thank you for your replies. I have now figured out why it would not work. When I brought this from the shop I was asked if I had owned a semi auto before to which I replied no. As the gun comes in 2 pieces in the box as new they offered to fit the burrel to the gun for me and part of this isputting the required parts on the gas system. The Hatsan semi auto has a small rubber washer which is part of the gas system. it turns out the shop had placed this washer in the wrong place. The washer should sit next to the piston. They had placed it outside the gun just under the screw cap. After spotti

Hi. I purchased a brand new Hatsan 12g semi auto 3 inch chanber this week and took it out for the first time today using 28g 8's and 28g 7.5 . it fired the first cartridgr ok, the bolt came back but it wont eject it. The bolt just pushed it back into the chamber and the next cartridge ended up out of the mag tube under the bolt. After emptying it out I tried using 32g SG's 70mm but the same thing happened. Please can some one give me ant idea what could be causing it. The ejector clip is not stuck. I also noticed what may be a fault with the fired cartridge. On my old gun the end of the e